- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- IEEE >>
- IEEE/ANSI C57.12.22-1995 [ Withdrawn ] American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below

【国外标准】 American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
本网站 发布时间:
2025-04-28
- IEEE/ANSI C57.12.22-1995 [ Withdrawn ]
- 定价: 55元 / 折扣价: 47 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard is intended for use as a basis for determining performance, interchangeability, and safety of the equipment covered, and to assist in the proper selection of such equipment.This standard covers certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety features of three-phase, 60 Hz., mineral-oil-immersed, self-cooled, padmounted,compartmental-type distribution transformers with high-voltage bushings. These transformers are rated 250… read more 0 kVA and smaller, with high voltages of 34 500 GrdY/19 920 volts and below, and with low voltages of 480 volts and below. These transformers are generally used for step-down purposes from an underground primary cable supply. This standard covers the bushing and terminal arrangements for radial feed systems. Either certain minimum dimensions (see figures 1-3) or certain specific dimensions (see figures 4-6) shall be specified. This standard does not cover the electrical and mechanical requirements of any accessory devices that may be supplied with the transformer. read less
标准号:
IEEE/ANSI C57.12.22-1995 [ Withdrawn ]
标准名称:
American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1130-24 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1154-24 Standard Terminology for Fiber-Reinforced Cement Products
- ASTM C1227-24 Standard Specification for Precast Concrete Septic Tanks
- ASTM C1242-23c Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- ASTM C1256-25 Standard Practice for Interpreting Glass Fracture Surface Features
- ASTM C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- ASTM C1558-24 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- ASTM C1613-24 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
- ASTM C1668-24 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1710-24 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- ASTM C1774-24 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM C1937-24 Standard Specification for Layered, Glass Fiber Felt Pipe and Board Insulation
- ASTM C31/C31M-24a Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C390-08(2024) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots