
【国外标准】 IEEE Draft Standard for AC Switches Rated above 1 kV up to 52 kV for Use in Metal-Enclosed Switchgear
本网站 发布时间:
2025-04-28
- IEEE PC37.20.4
- 定价: 67元 / 折扣价: 57 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 Scope This standard covers ac switches rated above 1 kV up to and including 52 kV for use in metal-enclosed switchgear. These switches may be: a) Stationary or drawout b) Manual or power operated c) Fused or unfused Within this standard, the words "switch(es)" shall be considered to mean three-phase, ac, gang-operated, switch(es) as defined by this scope. These switches are intended to be installed in an enclosure that provides a degree of protection to the switch and the enclosure may be… read more suitable for indoor or outdoor conditions and complies with the requirements of switchgear assemblies as defined by IEEE Std C37.20.2, IEEE Std C37.20.3, or IEEE Std C37.20.9. This standard does not apply to switches for use in subsurface or pad-mounted switchgear in IEEE Std C37.74 or to high-voltage air switches in IEEE Std C37.30.1. read less
标准号:
IEEE PC37.20.4
标准名称:
IEEE Draft Standard for AC Switches Rated above 1 kV up to 52 kV for Use in Metal-Enclosed Switchgear
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4921-20 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
- ASTM D4926-20 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
- ASTM D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D4942-20 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
- ASTM D4953-20 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
- ASTM D4960-20 Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
- ASTM D4982-20 Standard Test Methods for Flammability Potential Screening Analysis of Waste
- ASTM D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials
- ASTM D5012-20 Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
- ASTM D509-20 Standard Test Methods of Sampling and Grading Rosin
- ASTM D5132-20 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
- ASTM D5176-20 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
- ASTM D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
- ASTM D5240/D5240M-20 Standard Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate