
【国外标准】 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015)
本网站 发布时间:
2024-02-28
- ASTM F405-13
- Withdrawn, Replaced
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers the physical and dimensional requirements and associated test methods for corrugated polyethylene (PE) pipe and fittings intended for underground applications, particularly in soil drainage and septic field leach beds, where soil support is given to the flexible walls. Pipe and fittings shall adhere to physical test requirements such as elongation, brittleness, pipe stiffness, and perforations.1.1 This specification covers requirements and test methods for materials, marking dimensions, workmanship, elongation, brittleness, pipe stiffness, and perforations for corrugated polyethylene (PE) pipe and fittings in nominal sizes of 3 to 6 in., inclusive.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard..Note 1—Along with sizes 3 to 6 in. covered in this specification, sizes 4 to 24 in. are described in Specification F667.1.3 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.1.4 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM F405-13
标准名称:
Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015)
英文名称:
Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015)标准状态:
Withdrawn, Replaced-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 1085.13-1998 Railway permanent way material Spring fastening spikes for sleeper plates
- AS 1684.2 N3 Supp 13-1999 Residential timber-framed construction Non-cyclonic areas - N3 Supplement 13: Timber framing span tables - Wind classification N3 - Unseasoned hardwood - Stress Grade F11 (Supplement to AS 1684.2-1999)
- AS 1684.2 N4 Supp 13-2006 Residential timber-framed construction Non-cyclonic areas - N4 Supplement 13: Timber framing span tables - Wind classification N4 - Unseasoned hardwood - Stress Grade F11 (Supplement to AS 1684.2-2006)
- AS 1684.2 N4 Supp 13-2010 Residential timber-framed construction Non-cyclonic areas - N4 Supplement 13: Timber framing span tables - Wind classification N4 - Unseasoned hardwood - Stress Grade F11 (Supplement to AS 1684.2-2010)
- AS 1684.3 C1 Supp 13-2006 Residential timber-framed construction Cyclonic areas - C1 Supplement 13: Timber framing span tables - Wind classification C1 - Unseasoned hardwood - Stress Grade F11 (Supplement to AS 1684.3-2006)
- AS 1684.3 C2 Supp 13-2006 Residential timber-framed construction Cyclonic areas - C2 Supplement 13: Timber framing span tables - Wind classification C2 - Unseasoned hardwood - Stress Grade F11 (Supplement to AS 1684.3-2006)
- AS 1684.3 C3 Supp 13-1999 Residential timber-framed construction Cyclonic areas - C3 Supplement 13: Timber framing span tables - Wind classification C3 - Unseasoned hardwood - Stress Grade F11 (Supplement to AS 1684.3-1999)
- AS 1731.13-2003/Amdt 1-2005 Refrigerated display cabinets Test report
- AS 1742.13-2009 Manual of uniform traffic control devices Local area traffic management
- AS 1766.2.13-1991 Food microbiology Examination for specific organisms - Campylobacter
- AS 1766.3.13-1994 Food microbiology Examination of specific products - Liquid milks and creams
- AS 1807.13-1989 Cleanrooms, workstations and safety cabinets - Methods of test Determination of relative humidity in cleanrooms
- AS 1807.13-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of relative humidity in cleanrooms
- AS 2001.7.13-1983 Methods of test for textiles Quantitative analysis of fibre mixtures - Binary mixtures of acetate and certain chlorofibres (method using glacial acetic acid)
- ASTM E1778-98a(2019) Standard Terminology Relating to Pavement Distress