
【国外标准】 Tracked Changes. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%
本网站 发布时间:
2024-11-11
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS EN 15776:2022 - TC
标准名称:
Tracked Changes. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%
英文名称:
Tracked Changes. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%标准状态:
现行-
发布日期:
2023-10-15 -
实施日期:
出版语种:
- 推荐标准
- ASTM D5919-96(2022) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
- ASTM D5993-18(2022) Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
- ASTM D6049-03(2022) Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
- ASTM D6064-11(2022) Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
- ASTM D6071-14(2022) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
- ASTM D6074-15(2022) Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
- ASTM D6093-97(2022) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
- ASTM D6124-06(2022) Standard Test Method for Residual Powder on Medical Gloves
- ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
- ASTM D6189-97(2022) Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
- ASTM D6261-14(2022) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
- ASTM D6267/D6267M-13(2022) Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
- ASTM D6438-05(2022) Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography