- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ASTM >>
- ASTM F3588-22 Standard Guide for Set of Objects used with A-UGVs
【国外标准】 Standard Guide for Set of Objects used with A-UGVs
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 A-UGVs navigate, dock, or perform other tasks, or combinations thereof, within for example manufacturing, warehouse, hospital, and other environments. Objects (defined in Terminology F3200 as anything in the environment that is not infrastructure) and obstacles (defined in Terminology F3200 as static or moving objects that obstruct the intended movement) are common within these environments. Objects can cause A-UGV challenges in navigation, docking, etc. (see Test Method F3244, Guide F3470) where the object detection systems must provide the highest level of performance to allow safe and productive vehicle use. ASTM Committee F45 surveyed the A-UGV community of manufacturers, users, and researchers, and determined that a relatively short list of objects are the most common objects that their vehicles must detect and avoid. Additionally, ANSI/ITSDF B56.5 includes three test pieces that represent (1) the human body torso lying horizontally and (2) standing human leg, both with worst case, flat black coatings, and (3) flat objects (for example, boxes, doors, manufactured materials), including a worst case, highly (optically) reflective coating. The survey results are listed here and are considered example objects found in warehousing/manufacturing, healthcare, domestic, and retail environments:4.1.1 Pallets, racking, wheeled carts;4.1.2 Other A-UGVs or AMRs;4.1.3 Steps or stairs;4.1.4 Tables or desks, ladders;4.1.5 Cables or hoses, or both;4.1.6 Chairs, overhangs (that is, on objects);4.1.7 IV poles; and4.1.8 Forklifts/forklift tines.As some objects may not be cost-effectively available for only A-UGV object detection tests (for example, 4.1.2, 4.1.3, and 4.1.8), the remaining objects are potentially more cost-effective as objects and are described in this guide as the standard set of objects.4.2 The objects can vary greatly within their category. For example, pallets can be made of wood, plastic, or metal; have a variety of dimensions; can have wheels or no wheels on the bottom; are not coated or coated with varying reflective coatings. As such, the standard objects set provided in this guide describes a specific set of objects and characteristics that are highly repeatable across their users.4.3 The number of objects within the set is expected to increase as A-UGVs improve in capabilities and intelligence, and therefore, where A-UGV implementations expand.1.1 This standard guide provides a standard set of reference objects for use with automatic, automated, or autonomous unmanned ground vehicles (A-UGVs). The objects set includes typical objects found within industrial areas including, but not limited to: warehouses, hospitals, office spaces, and manufacturing facilities. Also, the objects set includes three test pieces from ANSI/ITSDF B56.5. The objects set is intended for use by A-UGV manufacturers and users to test the performance of A-UGVs when near the object(s). The objects set is minimized to include characteristics that have proven to cause interrupted A-UGV operation. Beyond this set of objects, Test Method F3418 is used to record most any object.1.2 The objects set contains one each of the following items: pallet, racking, ladder, cable cover, table, cart, intravenous (IV) pole, chair, forklift tines, and test pieces shown in ANSI/ITSDF B56.5, including a horizontal cylinder, vertical cylinder, and flat plate. The objects set is not intended to be exhaustive.1.3 It is intended that the objects set mainly includes off-the-shelf items. This standard guide provides a reporting method to provide obstacle information (for example, model, serial number, photograph) to allow obstacle use for exact replication of tests.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are not precise mathematical conversion to imperial units. They are close approximate equivalents for the purpose of specifying material dimensions or quantities that are readily available to avoid excessive fabrication costs of test apparatuses while maintaining repeatability and reproducibility of the test method results. These values given in parentheses are provided for information only and are not considered standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3588-22
标准名称:
Standard Guide for Set of Objects used with A-UGVs
英文名称:
Standard Guide for Set of Objects used with A-UGVs标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM F3586-22 Standard Practice for Remote ID Means of Compliance to Federal Aviation Administration Regulation 14 CFR Part 89
- 下一篇: ASTM F358-83(2002) Standard Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers (Withdrawn 2008)
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard