【国外标准】 Information technology -- Data centre facilities and infrastructures -- Part 3: Power distribution
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
Addresses power supplies to, and power distribution within, data centres based upon the criteria and classifications for "availability", "physical security" and "energy efficiency enablement" within ISO/IEC TS 22237-1. Specifies requirements and recommendations for a) power supplies to data centres; b) power distribution systems within data centres; c) facilities for both normal and emergency lighting; d) equipotential bonding and earthing; e) lightning protection; f) devices for the measurement of the power consumption characteristics at points along the power distribution system and their integration within management tools. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document may be of assistance in meeting these standards and regulations. Conformance of data centres to the present document is covered in Clause 4.
标准号:
INCITS/ISO/IEC TS 22237-3:2018 (2019)
标准名称:
Information technology -- Data centre facilities and infrastructures -- Part 3: Power distribution
英文名称:
Information technology -- Data centre facilities and infrastructures -- Part 3: Power distribution标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC TS 22237-2:2018 (R2024) Information technology - Data centre facilities and infrastructures - Part 2: Building construction, a Technical Report prepared by INCITS and registered with ANSI (Identical National Adoption of ISO/IEC TS 22237-2:2018)
- 下一篇: INCITS/ISO/IEC TS 22237-4:2018 (2019) Information technology -- Data centre facilities and infrastructures -- Part 4: Environmental control
- 推荐标准
- AS 1617.3-1993 Refractory bricks and shapes High alumina
- AS 1635.3.1-1993 Methods of test for pressure-sensitive adhesive tape - Adhesion strength
- AS 1635.3.5-1995 Methods of test for pressure-sensitive adhesive tape - Adhesion strength after water immersion
- AS 1635.3.6-1993/Amdt 2-1995 Methods of test for pressure-sensitive adhesive tape - Adhesion strength to own backing
- AS 1635.4.1-1993/Amdt 3-1995 Methods of test for pressure-sensitive adhesive tape - Stability of tape other than cellulose tape - Accelerated ageing
- AS 1646.3-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
- AS 1647.3-1995 Children's toys (safety requirements) Toxicological requirements
- AS 1678.3.0.015-1993 Emergency procedure guide - Transport - Formaldehyde solutions, flammable
- AS 1678.3.0.022-1989 Emergency procedure guide - Transport - Acrylonitrile (inhibited) (vinyl cyanide)
- AS 1678.3.1.001-1986 Emergency procedure guide - Transport - Petrol - as cargo
- AS 1678.3.2.001-1986 Emergency procedure guide - Transport - Toluene (toluol)
- AS 1684-1992 (Incl Supp 0,2,3,4,5,9,15) National Timber Framing Code
- AS 1684-1992/Amdt 3-1995 National Timber Framing Code
- AS 1684.2 N3 Supp 1-2006 Residential timber-framed construction Non-cyclonic areas - N3 Supplement 1: Timber framing span tables - Wind classification N3 - Seasoned softwood - Stress Grade F5 (Supplement to AS 1684.2-2006)
- AS 1684.2 N3 Supp 1-2010 Residential timber-framed construction Non-cyclonic areas - N3 Supplement 1: Timber framing span tables - Wind classification N3 - Seasoned softwood - Stress Grade F5 (Supplement to AS 1684.2-2010)

我的标准
购物车
400-168-0010








