
【国外标准】 Standard Practice for Physical Description Screening Analysis in Waste
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This practice is intended for use by those in the waste management industries to aid in describing the physical characteristics of waste.5.2 This practice has two uses. One is to visually screen wastes being received at the laboratory to identify discrepancies between the waste, manifest, and historical descriptions. The other use is to visually examine soil and water samples while they are being collected. This information, along with professional judgment during sample collection, can be used to increase the knowledge of the site contamination by increasing or reducing the number of samples collected based on visible indication of contamination or lack of visible indication of contamination. For example, if a soil or groundwater sample is collected “up gradient” of the area of known or suspected contamination to obtain site background concentrations, and the sample appears contaminated, the up-gradient area can be relocated during that sampling event. Visual observation could also show that the sampling parameters need to be increased or decreased. This may reduce or eliminate the need for additional sampling trips to the field.1.1 This practice is used to identify wastes by describing certain physical properties. It has been developed as a rapid but effective means for visually screening wastes when received in the laboratory or during collection at the sampling site.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard and warning information is given in 8.1.6.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4979-19
标准名称:
Standard Practice for Physical Description Screening Analysis in Waste
英文名称:
Standard Practice for Physical Description Screening Analysis in Waste标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
- ASTM D4404-18 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
- ASTM D4414-95(2020) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
- ASTM D4416-09(2023) Standard Specification for Acrylic Acid
- ASTM D4417-21 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
- ASTM D4418-22 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
- ASTM D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke
- ASTM D4426-01(2021) Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
- ASTM D4437/D4437M-16(2023) Standard Practice for Nondestructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
- ASTM D4439-23b Standard Terminology for Geosynthetics
- ASTM D444-88(2020) Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
- ASTM D4440-23 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
- ASTM D4441-20 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
- ASTM D4444-13(2018) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
- ASTM D4445-23 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)