- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- IEEE >>
- IEEE C57.12.34-2022 IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below

【国外标准】 IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
本网站 发布时间:
2025-04-28
- IEEE C57.12.34-2022
- 定价: 78元 / 折扣价: 67 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard covers certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety features of three-phase, 60 Hz, liquid-immersed, self-cooled, pad-mounted, compartmental-type distribution transformers. These transformers are rated 10 MVA and smaller, with the high-voltage limit of 34.5 kV system nominal voltage and below, and with low-voltage limit of 15 kV system nominal voltage and below. These transformers are generally used for step-down… read more purposes from an underground primary cable supply. This standard covers the connector, bushing, and terminal arrangements for radial or loop-feed systems. Either certain minimum dimensions or certain specific dimensions shall be specified. This standard does not cover the electrical and mechanical requirements of any accessory devices that may be supplied with the transformer. read less
标准号:
IEEE C57.12.34-2022
标准名称:
IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D6612-00(2022) Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
- ASTM D6630/D6630M-16(2022) Standard Guide for Low-Slope Insulated Roof Membrane Assembly Performance
- ASTM D6737-12(2017) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM D6763-16(2022) Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
- ASTM D6783-05a(2022) Standard Specification for Polymer Concrete Pipe
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6904-03(2022) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
- ASTM D6957-12(2025) Standard Practice for Measuring Curl in Paint Brush Filling Material
- ASTM D698-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM D6991-17(2022) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
- ASTM D7008-08(2022) Standard Specification for Geosynthetic Alternate Daily Covers
- ASTM D7102-17(2022) Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
- ASTM D7108-12(2018) Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist