- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- IEEE >>
- IEEE P18 IEEE Draft Standard for Shunt Power Capacitors
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This standard applies to power capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection to alternating current transmission and distribution systems operating at a nominal frequency of 50 Hz or 60 Hz.
标准号:
IEEE P18
标准名称:
IEEE Draft Standard for Shunt Power Capacitors
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE PC37.90.2 IEEE Draft Standard for Relays, Relay Systems, and Control Devices used for Protection and Control of Electric Power Apparatus - Radiated Electromagnetic Interference Withstand Capability Requirements and Tests
- 下一篇: IEEE PC57.142 IEEE Draft Guide to Describe the Occurrence and Mitigation of Switching Transients Induced by Transformers, Switching Device, and System Interaction
- 推荐标准
- ASTM D5594-18a(2024) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
- ASTM D6511/D6511M-18(2024) Standard Test Methods for Solvent Bearing Bituminous Compounds
- ASTM D6638-18(2024) Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
- ASTM D6916-18(2024) Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
- ASTM D8105-18(2024) Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results
- ASTM E18-24 Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
- ASTM D1293-18 Standard Test Methods for pH of Water
- ASTM D1334-18 Standard Test Method for Wool Content of Raw Wool—Commercial Scale
- ASTM D1415-18 Standard Test Method for Rubber Property—International Hardness
- ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D1601-18 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1675-18 Standard Test Methods for Polytetrafluoroethylene Tubing
- ASTM D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
- ASTM D1752-18(2023) Standard Specification for Preformed Sponge Rubber, Cork, and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
我的标准
购物车
400-168-0010










