
【国外标准】 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The IRR method has been used traditionally in finance and economics to measure the percentage yield on investment.5.1.1 The IRR method is appropriate in most cases for evaluating whether a given building or building system will be economically efficient, that is, whether its time-adjusted benefits will exceed its time-adjusted costs over the period of concern to the decision-maker. However, it has deficiencies that limit its usefulness in choosing among projects competing for a limited budget.5.2 The AIRR method is a measure of the overall rate of return that an investor can expect from an investment over a designated study period. It is appropriate both for evaluating whether a given building or building system will be economically efficient and for choosing among alternatives competing for a limited budget.5.2.1 The AIRR method overcomes some, but not all, of the deficiencies of the IRR. The AIRR is particularly recommended over the IRR for allocating limited funding among competing projects.1.1 This practice covers a procedure for calculating and interpreting the internal rate of return (IRR) and adjusted internal rate of return (AIRR) measures in the evaluation of building designs, systems, and equipment.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1057-15(2020)e1
标准名称:
Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
英文名称:
Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2545-1987/Amdt 1-2000 Subcontract conditions
- AS 2550.10-2006/Amdt 1-2009 Cranes, hoists and winches - Safe use Mobile elevating work platforms
- AS 2550.7-1996/Amdt No. 1-1999 Cranes - Safe use - Builders' hoists and associated equipment
- AS 2582.7-1983/Amdt 1-1986 Complete, filled transport packages - Methods of test - Low pressure test
- AS 2593-1995/Amdt 1-1998 Boilers - Unattended and limited attendance
- AS 2593-2004 (R2016)/Amdt 1-2007 Boilers - Safety management and supervision systems
- AS 2613-2005 (R2016)/Amdt 1-2007 Safety devices for gas cylinders
- AS 2638-1991/Amdt 1-1993 Sluice valves for waterworks purposes
- AS 2638.1-1999/Amdt 1-2001 Sluice valves for waterworks purposes - Metal seated
- AS 2638.2-1999/Amdt 1-2001 Sluice valves for waterworks purposes - Resilient seated
- AS 2658-2008/Amdt 1-2009 LP Gas - Portable and mobile appliances
- AS 2666-1996/Amdt 1-1997 Pressure-sensitive adhesive label stock - Paper
- AS 2678.1-1987/Amdt 1-1988 Methods for the analysis of zinc sulphide concentrates - Determination of the zinc content of zinc sulphide concentrates and zinc oxide fumes (titrimetric solvent extraction method)
- AS 2718 (Pt 1 to 2)-1984 Plastics pipes and fittings for gas reticulation - Polyethylene - Outside diameter series
- AS 2726.1-1995/Amdt 1-1997 Chainsaws - Safety requirements - Chainsaws for general use