【国外标准】 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

AbstractThese test methods cover physical testing of quicklime, hydrated lime, and limestone. Plastic property testing shall include test methods for standard consistency and plasticity of lime putty, water retention of hydrated lime, and air entrainment. Soundness testing shall include test methods for autoclave expansion, and popping and pitting of hydrated lime. Application testing shall include test methods for slaking rate of quicklime, dry brightness of pulverized limestone, limestone grindability determination by the laboratory ball mill method, and settling rate of hydrated lime. Particle size analysis shall include test methods for residue and sieve analysis, fineness of pulverized quicklime and hydrated lime by air permeability, particle size of pulverized limestone, and dry screening of hydrated lime, pulverized quicklime, and limestone by air jet sieving. Density measurement shall include the following test methods: apparent loose density, and apparent packed density of hydrated lime, pulverized quicklime, and limestone; specific gravity of hydrated lime products; and wet sieve analysis of agricultural liming materials.1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.2NOTE 1: Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C50).1.2 The test methods appear in the following order:Plastic Property Testing     Standard Consistency of Lime Putty 5Plasticity of Lime Putty 6Water Retention of Hydrated Lime 7Air Entrainment 8   Soundness Testing     Autoclave Expansion of Hydrated and Hydraulic Lime 9Popping and Pitting of Hydrated Lime 10   Application Testing     Slaking Rate of Quicklime 11Dry Brightness of Pulverized Limestone 12Limestone Grindability Determination by the Laboratory Ball Mill  Method 13Settling Rate of Hydrated Lime 14   Particle Size Analysis     Residue and Sieve Analysis 15Sieve Analysis of Dry Limestone, Quicklime, and Hydrated Lime 16Fineness of Pulverized Quicklime and Hydrated Lime by Air  Permeability 17Particle Size of Pulverized Limestone 18Dry Screening of Hydrated Lime, Pulverized Quicklime, and  Limestone by Air Jet Sieving 19Wet Sieve Analysis of Agricultural Liming Materials 20      Density Measurement     Apparent Loose Density of Hydrated Lime, Pulverized Quicklime,  and Limestone 21Apparent Packed Density of Hydrated Lime, Pulverized Quicklime,  and Limestone 22Relative Density (Specific Gravity) of Hydrated Lime Products 231.3 The values stated in SI units are to be regarded as standard. The values given in brackets are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.