
【国外标准】 Standard Guide for Development and Implementation of a Pollution Prevention Program (Withdrawn 2010)
本网站 发布时间:
2024-02-28
- ASTM E1609-01
- Withdrawn, No replacement
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide for development and implementation of a pollution prevention program is applicable to any organization or facility that releases materials to any of the three environmental media (air, water, or land) and that wishes to reduce those releases, without using treatment or transferring them to one of the other two media primarily for the purpose of disposal. Incentives for applying this standard of practice include concern for the environment, conservation of natural resources, economic considerations, and current and future regulatory compliance. Effective pollution prevention can also increase the efficiency of operations and use of resources, employee morale, and profitability while reducing liability.A successful pollution prevention program can save money by reducing waste management costs and raw material purchases, reduce potential emissions and disposal liabilities, protect public health and worker health and safety, and protect the environment. It will also position an organization to compete domestically and internationally through both long-term cost reductions and participation in green marketing opportunities.1.1 This guide covers guidance on a logical progression of tasks and procedures to be followed in a pollution prevention program to reduce or eliminate the generation of waste, the loss of natural resources, and process emissions through source reduction, reuse, recycling, and reclamation.1.2 Summary—The basic components of a pollution prevention program should include the following seven activities:1.2.1 Develop an organizational commitment to pollution prevention (see Section 4).1.2.2 Establish goals, objectives, and an implementation schedule (see Section 5).1.2.3 Generate baseline information (see Section 6).1.2.4 Develop a resource, emissions, and waste measurement and tracking system (see Section 7).1.2.5 Analyze pollution prevention opportunities (see Section 8).1.2.6 Prioritize pollution prevention opportunities (see Section 9).1.2.7 Implement and maintain the progress of a pollution prevention program (see Section 10).1.3 Organization of Text—This guide is organized based on the activities previously enumerated. Each section of the guide describes the manner in which the specified activity may be conducted to implement a program of pollution prevention at a facility.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E1609-01
标准名称:
Standard Guide for Development and Implementation of a Pollution Prevention Program (Withdrawn 2010)
英文名称:
Standard Guide for Development and Implementation of a Pollution Prevention Program (Withdrawn 2010)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D610-08(2019) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM D6104-97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
- ASTM D6105-04(2019) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D6107-97(2023) Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
- ASTM D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
- ASTM D611-23 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
- ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
- ASTM D6112-23 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
- ASTM D6117-23 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
- ASTM D6119-19(2024) Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
- ASTM D6122-23 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
- ASTM D6123/D6123M-97(2020) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
- ASTM D6124-06(2022) Standard Test Method for Residual Powder on Medical Gloves