
【国外标准】 Provisional Standard Specification for Pool Alarms (Withdrawn 2003)
本网站 发布时间:
2024-02-28
- ASTM PS128-01
- Withdrawn, Replaced
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This provisional standard is intended to provide performance requirements for pool alarms for residential swimming pools and spas.1.2 This provisional standard is intended to describe devices intended to improve personal safety and reduce injuries or deaths.1.3 This provisional standard covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.1.4 This provisional standard is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, etc.1.5 This standard covers four different types of alarms.1.6 The detection criteria for this standard is for a child one year of age and older.Note 1--Provisional standards require only subcommittee consensus and are published for a limited time of two years.
标准号:
ASTM PS128-01
标准名称:
Provisional Standard Specification for Pool Alarms (Withdrawn 2003)
英文名称:
Provisional Standard Specification for Pool Alarms (Withdrawn 2003)标准状态:
Withdrawn, Replaced-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM PS127-00 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications (Withdrawn 2003)
- 下一篇: ASTM PS129-01 Standard Provisional Test Method for Measurement of Permeability of Bituminous Paving Mixtures Using a Flexible Wall Permeameter (Withdrawn 2003)
- 推荐标准
- ASTM D6014-00(2023) Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
- ASTM D6016-17(2023) Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
- ASTM D6017-97(2020)e1 Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
- ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
- ASTM D6022-19 Standard Practice for Calculation of Permanent Shear Stability Index
- ASTM D6023-16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
- ASTM D6024/D6024M-16 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
- ASTM D6027/D6027M-24 Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes
- ASTM D6028/D6028M-20 Standard Practice for (Analytical Procedure) Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
- ASTM D6029/D6029M-20 Standard Practice for (Analytical Procedures) Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
- ASTM D6031/D6031M-24 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
- ASTM D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
- ASTM D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code
- ASTM D6039/D6039M-18 Standard Specification for Open and Covered Wood Crates
- ASTM D6040-18(2023) Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape