1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bathers.1.2 This consumer safety specification is intended to reduce the risk of death and minimize injury to infants resulting from use and reasonably foreseeable misuse or abuse of infant bathers.1.3 No infant bather produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

This consumer safety specification covers the requirements and test methods to promote safe use of infant and infant/toddler rockers by both occupants and caregivers. It is intended to minimize the risk of injury or death associated with a child’s use of an infant or infant/toddler rocker. The specific hazards addressed by this specification are product disassembly/collapse, stability, and falls from elevated surfaces. Intended occupants for infant rockers are infants who have not developed the ability to sit up unassisted (approximately 0-6 months of age), and infant/toddler rockers with an extended use with occupants until toddler age (approximately 2.5 years of age). Both infant and infant/toddler rockers include a restraint system. This specification does not address positions or modes on products that recline to 10 degrees or less above the horizontal or are intended primarily for sleeping. Also excluded from this specification are rockers intended for toddler only use without a restraint system, hand-held infant carriers or inclined sleep products that have the ability to rock or have a rocking mode. Test methods include seat angles test and cover single action release mechanisms, restraint system, stability, static slip resistance, structural integrity, disassembly/collapse, toy bar attachment integrity, permanency of labels and warnings, and protective components. Requirements for marking and labeling are also covered by this specification.1.1 This consumer safety specification covers establishment of requirements, test methods, and marking requirements to promote safe use of the rocker by an occupant and a caregiver.1.2 This specification does not cover rockers intended for toddler only use without a restraint system, hand-held infant carriers, or sleep products that have the ability to rock or have a rocking mode.1.3 This consumer safety specification is intended to minimize the risk of injury to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of an infant or infant/toddler rocker.1.4 No rocker produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons with the occupant in the product or the incidents resulting from abuse or misuse by other children.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

This specification covers the relationship between a person (consumer), organization, or custodian (or other authorized representative) and a managing (storing) organization (such as a web site or other organization). This will provide guidance to consumers, suppliers of personal (consumer) health records (PCHR) applications, and the public at large regarding the PCHR. Because the PCHR is distinct from the provider-based patient health record (PHR), the laws and conventions for provider-based patient health records may not apply to the PCHR. The PCHR supplier shall allow a consumer or other authorized individual easy access at any point in the PCHR application to the policies and standards to which the PCHR supplier site adheres, as well as their associated charges, if any. In a PCHR application, a consumer has the right to know about the following: the PCHR supplier's business model or a general outline of how its revenues are generated; how PCHR information is handled; how to get a copy of the PCHR; the extent of data mining, whether it is in aggregate or de-identified form, as well as options for opting-out of such data mining activities; PCHR supplier's privacy policy; options for transferring the PCHR to another supplier or elsewhere; provisions for identifying the audit trail for access to the consumer record when suppliers change and when changes occur in the business enterprise under which the supplier and record keeper operates; in case the business enterprise changes, the reissuance of privacy statements and positive reconfirmation of postal and mail address by the consumer following any corporate changes is recommended; and how to request deletion or destruction, or both, of a personal file at a PCHR supplier's system.1.1 This specification covers the relationship between a person (consumer), organization, or custodian (or other authorized representative) and a managing (storing) organization (such as a web site or other organization). However, web-based personal (consumer) health records that are created by healthcare providers or health plans are not within the scope of this specification. Further, this specification will not address personal (consumer) health records (PCHR) that are created and managed by patients on paper records, on personal computers, or on other media offline.

定价： 0元 / 折扣价： 0 元

1.1 This consumer safety specification covers establishment of requirements, test methods, and marking requirements to promote safe use of an infant bouncer seat by an occupant and a caregiver.1.2 For purposes of this consumer safety specification, an infant bouncer seat is a freestanding product intended to support an occupant in a reclined position to facilitate bouncing by the occupant, with the aid of a caregiver or by other means. Intended occupants are infants who have not developed the ability to sit up unassisted (approximately 0 to 6 months of age).1.3 This consumer safety specification is intended to minimize the risk of injury to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of an infant bouncer seat.1.4 No infant bouncer seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons with the occupant in an infant bouncer seat or the incidents resulting from abuse or misuse by other children.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

5.1 Despite child-resistant packaging requirements for most potentially harmful liquid consumer products, each year tens of thousands of young children are evaluated in emergency departments for potential poisoning from liquid consumer products. Products that use reclosable safety packaging rely on users to resecure the child-resistant closure fully after each use. If the closure is not fully secured or a child opens the closure, the entirety of the product contents is immediately accessible. Restricted delivery systems are a type of packaging for medications and other liquid consumer products designed to limit the amount of product that is accessible even after the primary closure is removed.5.2 This test method can be used to provide quantitative assessment of restricted delivery systems for liquid consumer products. This test method outlines three types of mechanical test procedures to simulate methods young children may use when attempting to access liquid contents from a container. To evaluate the efficacy of restricted delivery systems, tests are conducted with the primary closure removed and under conditions approximating intended use of the products. Instruction for use for the intended product should be used when preparing the samples for testing; for example, storage temperature, shaking of product, and use of associated dispensing devices when applicable.1.1 This test method covers assessment of non-metered restricted delivery system characteristics so that they can be evaluated to a standard that signifies efficacy in limiting accessibility of liquid contents to young children.1.2 This test method provides general test conditions for the determination of flow control of liquids by restricted delivery systems using mechanical testing to simulate methods that may be used to access liquid consumer products by young children.1.3 The test parameters provided within this test method are estimates based on existing literature and experience. The estimated values are intended to allow comparison of performance characteristics across different restricted delivery systems.1.4 This test method applies to liquids packaged in reclosable containers.NOTE 1: Since there are many variables that may affect release of liquid (for example, rigidity of container, viscosity of liquid contents, or variation in test equipment), it is important that the entire restricted delivery system is tested together as intended for use while using the same or similar testing equipment. This test method does not address other product characteristics that might be affected by use of restricted delivery systems (for example, uniformity of active ingredient throughout duration of use).1.5 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and expandable enclosures.1.2 Products known as expansion gates and expandable enclosures, or by any other name, which are in the scope of this consumer safety specification are intended for young children aged six months through 24 months, and are defined in Section 3.1.3 Expansion gates and expandable enclosures defined in Section 3 are for domestic use and are not to be confused with other types of gates or enclosures that may be specifically designed for commercial, institutional, agricultural, pet use, or any other such use.1.4 No expansion gate or expandable enclosure as defined in Section 3, that is, produced after the approval date of this consumer safety specification either by label or other means, shall indicate compliance with this specification unless it conforms to all the requirements contained herein.1.5 For expediency, expansion gates and expandable enclosures as defined in Section 3 will heretofore be referred to in this consumer safety specification as “gates” and “enclosures” unless referred to definitively.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 843元 / 折扣价： 717 元 加购物车