5.1 This guide is intended for use by employees of the end user, such as safety personnel or program administrators, who have chosen to implement a home-laundered flame resistant or arc rated clothing program.5.2 This guide describes the key components involved in the home care and maintenance of flame resistant or arc rated clothing. The decision to home launder flame resistant or arc rated clothing is part of an overall hazard analysis. It should include the nature of the hazard, the soils, and any chemicals present in the workplace. Conditions may exist that require work apparel to be cleaned at work or professionally due to the risk of contamination of the home or waste water caused by the wearer’s on-the-job exposure.5.3 The guide provides the end user assistance to follow laundering methods that will clean the garment and maintain the flame resistant or arc rated characteristics of the clothing during its useful service life. The guide also provides suggestions for increasing the wear life, appearance, and function of the clothing.5.4 The guide also provides suggestions as to when flame resistant or arc rated garments should be removed from service.5.5 The guide provides direction on proper garment repair, modification, and permanent removal from service.1.1 This guide provides recommendations for home laundering of clothing that is flame resistant or arc rated. These recommendations address the home laundering process. Home laundering is an effective cleaning process for flame resistant or arc rated garments; follow all label care instructions.1.1.1 This guide does not apply to industrial laundering of flame resistant or arc rated clothing. For more information on industrial laundering, follow Guide F1449 or contact your garment supplier.1.1.2 This guide does not apply to dry cleaning of flame resistant or arc rated clothing. For more information on dry cleaning, follow label instructions or contact your garment supplier or fabric manufacturer. Dry cleaning indicates cleaning by a professional dry cleaner.1.2 The National Institute for Occupational Safety and Health (NIOSH) recommends leaving clothing soiled with hazardous chemicals at work to be laundered by the employer or, if such clothing is washed at home, to launder separately from the family wash.1.3 It is important that potentially flammable contaminants are removed from garments during the wash process. If flammable contaminants are not removed, the flame resistance of the garment may be compromised. Effective cleaning and proper maintenance of the protective characteristics of flame resistant or arc rated clothing should include consideration of cleaning, repair, and replacement.1.3.1 To reduce the potential of employees wearing garments contaminated with flammable substances, the end user should analyze the soil conditions to which a wearer may be exposed, along with the effectiveness of the wash procedure. If it is deemed ineffective, effective solutions should be pursued (dry cleaning, industrial laundry, surfactants, disposable FR coveralls, etc.).1.4 It is important that the processes and materials used to launder flame resistant garments are compatible with the FR materials to ensure that the FR protection of the garment is not compromised during the laundering process.1.5 It is the responsibility of the end user to determine if their laundering method is the appropriate care and maintenance procedure for their application. (See Appendix X1 and X1.1.)1.6 This guide does not apply to specialized protective garments such as specialized firefighter turnout gear and proximity firefighter ensembles.1.7 This guide also provides recommendations for inspection criteria that are significant to the performance of flame resistant or arc rated clothing.1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

This specification covers youth-resistant firearms containers (YRFCs), which are lockable containers that completely contain firearm(s) to prevent unauthorized access to firearm(s). Removal of the contents of the YRFC shall be prevented, except by use of a qualified lock or other unique qualified methods, or both, as defined by the instructions accompanying the YRFC. Cycle test, picking test, plug torque test, manipulation test, handle torque test, drop test, tensile strength test, shock test, saw test, pry attack test, hinge attack test, and flammability test shall be performed to meet the requirements prescribed. The instructions on how to use YRFC are presented in details.1.1 This specification covers youth-resistant firearms containers (YRFCs), which are lockable containers that completely contain firearm(s) to prevent unauthorized access to firearm(s). These containers can be mechanical, electromechanical, or combination thereof. This specification:1.1.1 Establishes a moderate security level for firearms storage intended to prevent youths from gaining unauthorized access to firearm(s); and1.1.2 Establishes a consistent standard for testing and compliance certification.1.2 This specification contains functional, operational, safety, and performance requirements for YRFCs.1.3 This specification does not apply to transport-type firearm carrying cases, full-sized light gun cabinets, gun safes, high security gun safes, or container for firearms that exceed a length of 508 mm (20 in.).1.4 This specification is intended to prevent unauthorized access to children up to and including age eleven.1.5 This specification is not intended to:1.5.1 Ensure theft resistance of the YRFC or the contents of the YRFC; or1.5.2 Ensure quick access to a firearm or assure long-term reliability of the YRFC operation to provide quick access to a firearm.1.6 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.7 The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

This specification establishes the indoor ballistic test range requirements for small arms and fragmentation testing of the following ballistic-resistant items: soft body armor, hard armor plates, body armor accessories, shields, and helmets. It specifies critical test range parameters in order to achieve consistency/repeatability among test ranges. It does not apply to “contact” shots taken on the test item (that is, the muzzle rests on the strike face of the test item).1.1 This standard specifies indoor ballistic test range requirements for small arms and fragmentation testing of the following ballistic-resistant items: soft body armor, hard armor plates, body armor accessories, shields, and helmets. The specification includes requirements for range geometry (for example, dimensions, alignment, spacing), range conditions (for example, temperature, humidity, lighting), test equipment (for example, receiver, mounting, test barrels, backing assembly mounting), instrumentation (for example, light screens, high speed cameras, radar), and measurement procedures (for example, projectile velocity, yaw).1.2 The purpose of this standard is to specify critical test range parameters in order to achieve consistency/repeatability among test ranges.1.3 This specification is not applicable for “contact” shots taken on the test item (that is, the muzzle rests on the strike face of the test item).1.4 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.4.1 The user of this standard will identify the system of units to be used, and it is critical to ensure that any cross-referenced standards maintain consistency of units between standards.1.5 This standard does not address environmental concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate practices and determine the applicability of regulatory requirements prior to use.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车