
【国外标准】 Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The procedures recommended in this guide can be used to assess the sensory characteristics before, during, and after usage of skin care products.5.2 This guide is applicable to product categories that include skin lotions and creams, facial moisturizers, hand lotions and creams, anti-aging lotions and creams, suntan lotions, personal repellents, and other skin care products.5.3 Procedures of the type described herein may be used to communicate perceived sensory properties within and between manufacturers and to the consumer through the media. These guidelines are suggested to meet the need for ascertaining the performance of experimental and commercial products.5.4 These procedures are to be used by assessors who are screened for sensory acuity, trained to use their senses to evaluate products, and in the procedures outlined by the panel method of choice, either technical assessor or consumer behavioral approach.5.5 This guide provides suggested procedures and is not meant to exclude alternate procedures that may be effective in training skinfeel panels and providing sensory evaluation descriptions.1.1 The objective of this guide is to provide procedures for two different descriptive analysis approaches that may be used to qualitatively describe the sensory attributes of skin creams and lotions and quantitatively measure their intensity, similarities, and differences over time. Descriptive analysis can be used to define the sensory experience of skin care products that can then be used to provide direction in product formulation, competitive assessment, ingredient substitutions, research guidance, and advertising claim substantiation.1.2 Guidelines are provided to assist the reader in determining which approach best meets their research objectives, either the (1) technical assessor or (2) consumer behavior approach to language development and evaluation.1.3 Guidelines are provided for the selection and training of assessors, defining sensory attributes, measuring intensities on rating scales, developing procedures for the manipulation of the product alone and the product on the skin, product handling, and evaluation of skin condition before testing.1.4 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1490-19
标准名称:
Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions
英文名称:
Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 4276.19:2014 Water microbiology Examination for thermophilic Campylobacter spp. - Membrane filtration
- AS 5013.19.1-2012 Food microbiology Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of ß-glucuronidase-positive Escherichia coli-Colony-count technique at 44°C using membranes and 5-bromo-4-chloro-3-indolylß-D-glucuronide (ISO 16649-1:2001, MOD)
- AS/NZS 1462.19(Int):1999 Methods of test for plastics pipes and fittings C-Ring test for fracture toughness of PVC pipes
- AS/NZS 2111.19.2:1996 (R2016)/Amdt 1:1998 Textile floor coverings - Tests and measurements - Colourfastness tests - Shampoo solution
- AS/NZS 4456.19:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining of bow
- AS/NZS 60745.2.19:2011 Hand-held motor-operated electric tools - Safety Particular requirements for jointers
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- ASTM A1009-18 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
- ASTM A101-04(2019) Standard Specification for Ferrochromium