
【国外标准】 Standard Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guide establishes minimum standards criteria for MSAR personnel. Users of this guide shall have the ability to be a self-supporting deployable resource (for self and equine) and should be self-supporting while at base camp for a minimum duration of 24 h.4.2 At no time will this standard supersede any established protocol of international, national, federal, state, tribal, local, or regional governments.4.3 MSAR responders work with a variety of individuals and organizations, including law enforcement, fire and rescue, casual volunteers and family members of the missing subject(s).4.4 This standard does not address the wearing of a riding helmet while deployed on an MSAR mission. However, users of this standard shall be aware that many AHJ’s require the wearing of riding helmets while deployed on an MSAR mission and out of area response may require wearing a riding helmet.1.1 This guide establishes the minimum knowledge, skills, and abilities (KSA) required for an MSAR responder and their equine during the deployment involving lost or missing persons and related non-technical rescue skills used to stabilize or minimize a missing person (subject) from remaining in peril.1.2 MSAR users of the guide shall meet or hold the certified equivalent KSA defined in Guide F2209.1.3 Users of this standard should, at minimum, have pre-existing basic horsemanship skills that are equivalent to what is published within: The United States Pony Club Manual of Horsemanship: Basics for Beginners/D Level (1).21.4 Users of this standard should be aware of other MSAR standards, requirements, guidelines, policies, procedures, or protocols, or combinations thereof that have been established and which may be under the jurisdiction of federal, state, tribal, local, or other regional authorities (for examples of two (USA) state level MSAR standards, see Refs 2 and 3).1.5 This standard is created without bias to the type of tack, gear, packs, first aid supplies, personal protective equipment (for self or equine), or riding discipline that is practiced by the MSAR responder.1.6 This standard does not address the mounted evacuation of a subject, although an AHJ may determine when and if a mounted evacuation would be appropriate and what local protocols will be implemented.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2794-09(2020)
标准名称:
Standard Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder
英文名称:
Standard Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASC X9 TR 51-2020 Levies Companion Document Uniform Adoption of X9.129 for Levies Version 3.0
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- ASTM A1009-18 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
- ASTM A101-04(2019) Standard Specification for Ferrochromium
- ASTM A1010/A1010M-13(2018) Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
- ASTM A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
- ASTM A1015-01(2018) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
- ASTM A1016/A1016M-23 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
- ASTM A102-04(2019) Standard Specification for Ferrovanadium