- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ASTM >>
- ASTM E1958-22 Standard Guide for Sensory Claim Substantiation

【国外标准】 Standard Guide for Sensory Claim Substantiation
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This guide covers reasonable practices for designing and implementing sensory tests that validate claims pertaining only to the sensory or perceptual attributes, or both, of a product. This guide was developed for use in the United States and must be adapted to the laws and regulations for advertisement claim substantiation for any other country. A claim is a statement about a product that highlights its advantages, sensory or perceptual attributes, or product changes or differences compared to other products in order to enhance its marketability. Attribute, performance, and hedonic claims, both comparative and non-comparative, are covered. This guide includes broad principles covering selecting and recruiting representative consumer samples, selecting and preparing products, constructing product rating forms, test execution, and statistical handling of data. The objective of this guide is to disseminate good sensory and consumer testing practices. Validation of claims should be made more defendable if the essence of this guide is followed.Table of ContentsIntroduction 1Referenced Documents 2Terminology 3Basis of Claim Classification 4Consumer Based Affective Testing 5 Sampling 5.1 Sampling Techniques 5.2 Selection of Products 5.3 Sampling of Products When Both Products Are Currently on the Market 5.4 Handling of Products When Both Products Are Currently on the Market 5.5 Sampling of Products Not Yet on the Market 5.6 Sample Preparation/Test Protocol 5.7Test Design—Consumer Testing 6 Data Collection Strategies 6.6 Interviewing Techniques 6.7 Type of Questions 6.8 Questionnaire Design 6.9 Instruction to Respondents 6.10 Instructions to Interviewers 6.11 General/Overall Questions 6.12 Positioning of the Key Product Rating Questions 6.13 Total Test Context and Presentation Matters 6.14 Specific Attribute Questions 6.15 Classification or Demographic Questions 6.16 Preference Questions 6.17Test Location 7Test Execution by Way of Test Agencies—Food and Non-food Testing 8Documents to Retain in Sensory Claims Substantiation Research 9Laboratory Testing Methods 10 Types of Tests 10.2 Advantages and Limitations of the Use of Trained Descriptive Panels in Claims Support Research 10.3Test Design—Laboratory Testing 11 Product Procurement 11.6 Experimental Design 11.7 Data Collection 11.8 Data Analysis 11.9Questionnaire Construction 12Test Facility 13Statistical Analysis 14 Paired-Preference Studies 14.1 Superiority Claims 14.2 Equivalence Claims 14.3 Unsurpassed Claims 14.4 Paired Comparison/Difference Studies 14.5 Analysis of Data from Scales 14.6Keywords 15Commonly Asked Questions About ASTM and Claim Substantiation Appendix X11.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1958-22
标准名称:
Standard Guide for Sensory Claim Substantiation
英文名称:
Standard Guide for Sensory Claim Substantiation标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 3730.22-1993 Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior
- AS 7240.22-2008 Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD)
- AS A81, A82, A83, A84, A92-1958 Steel reinforcing materials for normal reinforced concrete
- AS CA2-1958 Australian standard rules for the use of normal reinforced concrete in buildings
- AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings Method for the determination of pipe stiffness
- AS/NZS 2341.22:1996 (R2013) Methods of testing bitumen and related roadmaking products Determination of particle charge
- AS/NZS 4266.22:1996 Reconstituted wood-based panels - Methods of test Determination of porosity of laminated surface
- AS/NZS 60745.2.22:2011/Amdt 1:2012 Hand-held motor-operated electric tools Safety - Particular requirements for cut-off machines (IEC 60745-2-22 Ed 1, MOD)
- AS/NZS CISPR 22:2004 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- AS/NZS IEC 60670.22:2012 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Particular requirements for connecting boxes and enclosures
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections