
【国外标准】 Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Emergency Medical Technician
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 Since the quality of pre-hospital AEMT training depends, in large measure, on the instructional abilities and competencies of the AEMT instructor, it is imperative that the individual selected and used in this capacity possess the qualifications and capabilities necessary to provide effective instruction.4.2 An AEMT instructor must possess clearly defined knowledge and skills competencies, have clearly defined responsibilities and scope of authority related to instructional programs, and meet other specific requirements pertinent to the level of instruction.4.3 Using this guide, EMS institutions and organizations should be able to develop requirements for selection and utilization of ALS/EMT instructors for ALS/EMT training and education programs.1.1 This guide is intended to assist emergency medical services (EMS) agencies and institutions in selecting and utilizing individuals who teach in EMT (emergency medical technician) training programs that include instruction in advanced life support knowledge and skills.1.2 This guide identifies six categories of instructor in an AEMT (advanced emergency medical technician) training program: adjunct instructor, clinical/field preceptor, practical skills instructor, associate instructor, course instructor/coordinator (I/C), and course administrator. The guide recognizes that an individual may, depending on his/her level of practice and the training program involved, function in any or all of these categories.1.3 This guide includes specific guidelines for qualifications, training, education, experience, scope of authority, responsibilities, continuing education, evaluation, and maintenance of competency when applicable.1.4 This guide does not include specific guidelines for the course administrator or the adjunct instructor. While the guide recognizes, by offering a definition of each category, that these types of individuals function in many AEMT training programs, the limited instructional roles played by these individuals preclude the need for specific selection and utilization guidelines.1.5 This guide is intended to apply to any individual who teaches in an AEMT training program regardless of the individual's present level of clinical practice.1.6 This guide intentionally omits references to length of pre-hospital care experience, teaching experience, and continuing education requirements. This guide also omits reference to waiver or equivalency. These issues should be addressed by the appropriate agency.1.7 This guide applies only to instructors who teach in AEMT training courses designed to prepare an individual for certification to practice above the level of the EMT. It does not apply to instructors who teach in specialized courses that do not in themselves qualify the individual for a level of EMT certification.1.8 This guide does not establish certification requirements. Such requirements should be established by the certifying agency in the jurisdiction in which the AEMT instructor will function. This guide may be used to provide considerable guidance to the jurisdiction responsible for establishing certification standards.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.NOTE 1: Also see Practice F1031.1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1257-22
标准名称:
Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Emergency Medical Technician
英文名称:
Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Emergency Medical Technician标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 3730.22-1993 Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior
- AS 7240.22-2008 Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD)
- AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings Method for the determination of pipe stiffness
- AS/NZS 2341.22:1996 (R2013) Methods of testing bitumen and related roadmaking products Determination of particle charge
- AS/NZS 4266.22:1996 Reconstituted wood-based panels - Methods of test Determination of porosity of laminated surface
- AS/NZS 60745.2.22:2011/Amdt 1:2012 Hand-held motor-operated electric tools Safety - Particular requirements for cut-off machines (IEC 60745-2-22 Ed 1, MOD)
- AS/NZS CISPR 22:2004 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- AS/NZS IEC 60670.22:2012 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Particular requirements for connecting boxes and enclosures
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members