【国外标准】 IEEE/IEC Draft International Standard for Explosive atmospheres -- Part 30-2: Electrical resistance trace heating -- Application guide for design, installation and maintenance
本网站 发布时间:
2025-10-27
- IEEE/IEC P60079-30-2
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This part of IEC 60079 provides guidance for the application of electrical resistance trace heating systems in areas where explosive atmospheres may be present, with the exclusion of those classified as requiring Equipment Protection Level (EPL) Ga/Da (traditional relationship to Zone 0 and Zone 20 respectively). This standard also provides guidance for explosive atmospheres incorporating the Division method of area classification that may be applied by some users of this standard. NOTE… read more Information on the Division method is given in NFPA 70 and CSA C22.1. It provides recommendations for the design, installation, maintenance and repair of trace heating systems including associated control and monitoring equipment. It does not cover devices that operate by induction heating, skin effect heating or direct pipeline heating, nor those intended for stress relieving. read less
标准号:
IEEE/IEC P60079-30-2
标准名称:
IEEE/IEC Draft International Standard for Explosive atmospheres -- Part 30-2: Electrical resistance trace heating -- Application guide for design, installation and maintenance
英文名称:
IEC/IEEE Draft International Standard for Explosive atmospheres -- Part 30-2: Electrical resistance trace heating -- Application guide for design, installation and maintenance标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE P1930.1 IEEE Approved Draft Recommended Practice for Software Defined Networking (SDN) based Middleware for Control and Management of Wireless Networks
- 下一篇: IEEE/IEC P60079-30-1 IEEE/IEC Draft International Standard - Explosive atmospheres -- Part 30-1: Electrical resistance trace heating -- General and testing requirements
- 推荐标准
- ASTM E2760-19e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
- AS 1617.2-1993/Amdt 1-1994 Refractory bricks and shapes - Insulating
- AS 1627.2-1989 Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning
- AS 1629P-1979/Amdt 1-1994 Scorched particle standards for dry milk
- AS 1635.3.6-1993/Amdt 2-1995 Methods of test for pressure-sensitive adhesive tape - Adhesion strength to own backing
- AS 1635.4.1-1993/Amdt 2-1994 Methods of test for pressure-sensitive adhesive tape - Stability of tape other than cellulose tape - Accelerated ageing
- AS 1646-1992/Amdt 2-1993 Elastomeric seals for waterworks purposes
- AS 1667.2-1984/Amdt 1-1985 Plastics pipes and fittings for gas reticulation - Polyethylene - Nominal size series - Fittings
- AS 1668.2-1980 The use of mechanical ventilation and air-conditioning in buildings (known as the SAA Mechanical Ventilation and Air-conditioning Code) Ventilation requirements
- AS 1668.2-2002/Amdt 1-2002 The use of ventilation and airconditioning in buildings Ventilation design for indoor air contaminant control
- AS 1668.2-2012/Amdt 1-2013 The use of ventilation and airconditioning in buildings - Mechanical ventilation in buildings
- AS 1674.2-2003 Safety in welding and allied processes Electrical
- AS 1678.2.1.001-1986 Emergency procedure guide - Transport - Liquefied petroleum gas (LPG)
- AS 1678.2.1.010-1986 Emergency procedure guide - Transport - Butadiene (inhibited)
- AS 1678.2.2.000-1986 Emergency procedure guide - Transport - Oxygen (refrigerated liquid)

我的标准
购物车
400-168-0010








