
【国外标准】 Standard Practice for Microcrystal Testing in Forensic Analysis for Cocaine
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This technique involves a chemical-precipitation reaction between cocaine and the precipitating reagent. The habit and the aggregation of the crystals formed could be used to distinguish cocaine from other drugs (6).5.2 This technique can be utilized on cocaine present in either the salt or free base form.5.3 This technique does not distinguish between the salt and free base forms.1.1 This practice describes procedures applicable to the analysis of cocaine using multiple microcrystal tests (1-6).21.2 These procedures are applicable to cocaine, which is present in solid form or an injectable liquid form. They are not typically applicable to the analysis of cocaine in biological samples.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 These procedures could generate observations indicating a positive test for cocaine or its enantiomers which could be incorporated into the analytical scheme as defined by the laboratory.1.5 This standard cannot replace knowledge, skills, or abilities acquired through appropriate education, training, and experience (see Practice E2326) and is to be used in conjunction with professional judgment by individuals with such discipline-specific knowledge, skills, and abilities.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1968-19
标准名称:
Standard Practice for Microcrystal Testing in Forensic Analysis for Cocaine
英文名称:
Standard Practice for Microcrystal Testing in Forensic Analysis for Cocaine标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 4276.19:2014 Water microbiology Examination for thermophilic Campylobacter spp. - Membrane filtration
- AS 5013.19.1-2012 Food microbiology Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of ß-glucuronidase-positive Escherichia coli-Colony-count technique at 44°C using membranes and 5-bromo-4-chloro-3-indolylß-D-glucuronide (ISO 16649-1:2001, MOD)
- AS CA18-1968 Installation and maintenance of portable fire extinguishers and fire hose reels
- AS CA52.1-1968 Code of recommended practice - Design for access by handicapped persons Public buildings and facilities
- AS/NZS 1462.19(Int):1999 Methods of test for plastics pipes and fittings C-Ring test for fracture toughness of PVC pipes
- AS/NZS 2111.19.2:1996 (R2016)/Amdt 1:1998 Textile floor coverings - Tests and measurements - Colourfastness tests - Shampoo solution
- AS/NZS 4456.19:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining of bow
- AS/NZS 60745.2.19:2011 Hand-held motor-operated electric tools - Safety Particular requirements for jointers
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members