
【国外标准】 IEEE Recommended Practice for Inductive Coordination of Electric Supply and Communication Lines
本网站 发布时间:
2025-04-28
- IEEE 776-2018
- 定价: 106元 / 折扣价: 91 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This recommended practice addresses the inductive environment that exists in the vicinity of electric power and wire-line telecommunications systems and the interfering effect that may be produced thereeby; guidance is offered for the control or modification of the environment and the susceptibility of the affected systems in order to maintain an acceptable level of interference. An acceptable level is defined as an amount of steady-state or surge induced longitudinal voltage or current that… read more does not cause a personnel or public safety hazard, damage to cable or equipment, and/or circuit degradation or failure. To aid the user of this recommended practice in calculating induction between power and telecommunication lines, the concept of an interface is developed. This recommended practice permits either party, without need to involve the other, to verify the induction at the interface by use of a probe wire. This recommended practice does not apply to railway signal circuits. read less
标准号:
IEEE 776-2018
标准名称:
IEEE Recommended Practice for Inductive Coordination of Electric Supply and Communication Lines
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-140-2018 Financial Services - Image Replacement Document - IRD
- ANSI X9.100-180-2006 (S2018) Specifications for Electronic Exchange of Check and Image Data (non-domestic) (Formerly published as DSTU X9.37-2003)
- ANSI X9.100-188-2018 Financial Services - Return Reasons for Check - Image Exchange and IRDs
- ANSI X9.112-3-2018 Wireless Management and Security - Part 3: Mobile
- ANSI X9.84-2018 Biometric Information Management and Security for the Financial Services Industry
- ANSI/OPEI B175.6-2018 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Hedge Trimmers - Safety and Environmental Requirements
- AS 1366.1-1992 (R2018)/Amdt 1-1992 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polyurethane (RC/PUR)
- AS 1366.3-1992 (R2018)/Amdt 1-1993 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - Moulded (RC/PS - M)
- ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
- ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- ASTM E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM E2139-05(2018) Standard Test Method for Same-Different Test
- ASTM E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories