
【国外标准】 IEEE Standard for Design and Performance Requirements for Bushings Applied to Liquid-Immersed Distribution Transformers
本网站 发布时间:
2025-04-28
- IEEE C57.19.02-2023
- 定价: 66元 / 折扣价: 57 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard covers electrical, mechanical, dimensional, and related requirements for non-condenser bushings used in liquid-immersed distribution transformers covered by IEEE Std C57.12.20™ [B3], IEEE Std C57.12.34™ [B4], IEEE Std C57.12.36™ [B5], and IEEE Std C57.12.38™ [B6] and that have basic impulse insulation levels (BILs) of less than or equal to 200 kV.6 These requirements are to be interpreted, measured, or tested in accordance with IEEE Std C57.19.00™ unless otherwise stated in this standard.
标准号:
IEEE C57.19.02-2023
标准名称:
IEEE Standard for Design and Performance Requirements for Bushings Applied to Liquid-Immersed Distribution Transformers
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 4276.19:2014 Water microbiology Examination for thermophilic Campylobacter spp. - Membrane filtration
- AS 5013.19.1-2012 Food microbiology Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of ß-glucuronidase-positive Escherichia coli-Colony-count technique at 44°C using membranes and 5-bromo-4-chloro-3-indolylß-D-glucuronide (ISO 16649-1:2001, MOD)
- AS/NZS 1462.19(Int):1999 Methods of test for plastics pipes and fittings C-Ring test for fracture toughness of PVC pipes
- AS/NZS 2023:1995 Baths for ablutionary purposes
- AS/NZS 2111.19.2:1996 (R2016)/Amdt 1:1998 Textile floor coverings - Tests and measurements - Colourfastness tests - Shampoo solution
- AS/NZS 4456.19:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining of bow
- AS/NZS 60745.2.19:2011 Hand-held motor-operated electric tools - Safety Particular requirements for jointers
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1033-18(2023) Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
- ASTM A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
- ASTM A1071/A1071M-11(2023) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A1080/A1080M-19 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
- ASTM A1090/A1090M-19 Standard Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures
- ASTM A1095-15(2023) Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings