
【国外标准】 IEEE Standard for Process Industry--International Energy Efficiency Class 3 (IE3) Premium-Efficiency, Severe Duty, Totally Enclosed Frame Surface Cooled Squirrel Cage Induction Motors--0.75 kW to 370 kW (1 hp to 500 hp)
本网站 发布时间:
2025-04-28
- IEEE 841.1-2023
- 定价: 65元 / 折扣价: 56 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard applies to IE3 (premium-efficiency) totally enclosed fan-cooled (TEFC) International Cooling IC411, totally enclosed air over (TEAO) IC418 and totally enclosed non-ventilated (TENV) IC410, horizontal and vertical, single-speed, squirrel cage polyphase induction motors, 0.75 kW to 370 kW (1 hp to 500 hp), and up to 4000 V, in International Electrotechnical Commission (IEC) frame sizes (80) and larger, for severe-duty applications seen in the Process Industry (commonly referred to… read more as IE3 (premium-efficiency) severe-duty motors). Excluded from the scope of this standard are motors with sleeve bearings, totally enclosed blower cooled (TEBC) IC416, and additional specific features required for flame proof motors. read less
标准号:
IEEE 841.1-2023
标准名称:
IEEE Standard for Process Industry--International Energy Efficiency Class 3 (IE3) Premium-Efficiency, Severe Duty, Totally Enclosed Frame Surface Cooled Squirrel Cage Induction Motors--0.75 kW to 370 kW (1 hp to 500 hp)
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE 303-2023 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations and Class II, Division 2 and Zone 22 Locations
- 下一篇: IEEE 3304-2023 IEEE Standard for Adoption of Moving Picture, Audio and Data Coding by Artificial Intelligence (MPAI) Technical Specification Neural Network Watermarking (NNW) V1
- 推荐标准
- AS 2205.4.1-1997 Methods for destructive testing of welds in metal - Nick-break test
- AS 2205.5.1-1997 Methods for destructive testing of welds in metal - Macro metallographic test for cross-section examination
- AS 2205.6.1-1997 Methods for destructive testing of welds in metal - Weld joint hardness test
- AS 2205.7.1-1997 Methods for destructive testing of welds in metal - Charpy V-notch impact fracture toughness test
- AS 2205.9.1-1997 Methods for destructive testing of welds in metal - Hot cracking test
- AS 2213.1-2001/Amdt 1-2002 Commercial road vehicles - Mechanical connections between towing vehicles Selection and marking of pin-type couplings and drawbar eyes
- AS 2219.1.1-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to hot sodium hydroxide
- AS 2219.1.3-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to boiling hydrochloric acid
- AS 2219.1.5-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to citric acid at room temperature
- AS 2219.2.1-1978 Methods of test for vitreous enamel coatings Physical tests - Determination of resistance of vitreous enamel coatings on steel to thermal shock
- AS 2224.1-1986 Medicine measures (including paediatric droppers) Glass - For general use
- AS 2225-1994/Amdt 1-1996 Insulating gloves for electrical purposes
- AS 2229.1-1982 Electrical equipment for explosive atmospheres - Electrical systems of dispensing equipment Flammable liquid dispensing equipment
- AS 2275.1-1979 Combustible gas detection instruments for use in explosive atmospheres General requirements for explosion protection of electrical apparatus and systems
- AS 2276.1-1992 Cables for traffic signal installations Multicore power cables