【国外标准】 Standard Guide for Measuring Characteristics of Sapphire Substrates
本网站 发布时间:
2024-02-28
- ASTM F2358-04
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
The measurements described in this guide can significantly affect the function of the sapphire substrate.Substrates with excessive form errors in the free state may cause processing errors in production.The restrained state of the substrate is intended to simulate as closely as possible the form that the substrate will take in one of its intended uses. During processing, one surface of the substrate is sometimes forcibly restrained to a flat state through either vacuum or adhesion to a flat surface. The measurements in the clamped state are intended to model the form of the front surface of the substrate when the back surface is constrained to the reference plane. The form in the clamped state may have a direct impact on the performance of the substrate in use.The user should determine whether the unrestrained or restrained measurements are most pertinent to the application and specify the appropriate parameters accordingly.Knowledge of these characteristics can help the producer and consumer determine if the dimensional characteristics of a specimen substrate satisfy given geometrical requirements.This guide is suitable for sapphire substrates in the as-sliced, lapped, polished, or other condition. Refer to SEMI M3 for substrate specifications.Until the results of a planned interlaboratory evaluation of this guide are established, use of this guide for commercial transactions is not recommended unless the parties to the test establish the degree of correlation that can be obtained.1.1 This guide covers a nondestructive procedure to determine the form of clean, dry sapphire substrates.1.2 This guide is applicable to substrates 25 mm or larger in diameter, with a minimum thickness of 100 μm. This guide is independent of surface finish.1.3 The measurements described in this guide may be applied to the entire global surface of the substrate, or to smaller localized areas.1.4 The value of the measurements described in this guide will be affected by the amount of edge exclusion (that is, the area around the perimeter of the part which is ignored). The amount excluded should be agreed upon by the producer and consumer using this standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
标准号:
ASTM F2358-04
标准名称:
Standard Guide for Measuring Characteristics of Sapphire Substrates
英文名称:
Standard Guide for Measuring Characteristics of Sapphire Substrates标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM F2357-10 Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader (Withdrawn 2017)
- 下一篇: ASTM F2359-04(2019) Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source (Withdrawn 2023)
- 推荐标准
- 国家标准计划
- BS ISO 24138:2024 Information and documentation. International Standard Content Code (ISCC)
- 24/30492859 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard
- BS EN IEC 61753-071-02:2020+A1:2024 Fibre optic interconnecting devices and passive components. Performance standard
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard