【国外标准】 Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles (Withdrawn 2010)

本网站发布时间： 2024-02-28

ASTM C1398-07
Withdrawn, No replacement
定价： 0元
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

The performance of an admixture for shotcrete in the field varies with the composition of the hydraulic cement and sand combination. Since this test method involves the determination of time of setting of a particular combination of hydraulic cement, sand and an admixture, it therefore provides information on the suitability for use of that particular combination in the field.The time of setting of the combination established in the laboratory does not necessarily indicate the time of setting this combination will produce in actual shotcreting in the field.This method is used to determine the effect on time of setting of mortars containing admixtures as compared to a control mortar.The test method is used for comparison in laboratory pre–evaluation studies to demonstrate the effect of shotcrete admixtures in mortar compared with plain mortar and can be used to demonstrate or compare the performance of shotcrete admixtures which produce rapid setting or rapid rheological stiffening of shotcrete.The test method is used to evaluate the relative performance of more than one shotcrete admixture for comparison of performance.The test method is used to determine or verify that no adverse effects on setting time may be experienced with the use of admixtures that are not intended to accelerate or are used to produce stiffening of shotcrete mixtures.Although specific environmental conditions are indicated, the testing environment can be varied to simulate the performance of admixtures in mortars at different temperatures. Such variations are reported as indicated in Section 11.1.1 This is a laboratory test method that covers the determination of the time of setting of hydraulic-cement mortars containing additives for shotcrete for comparison with control mixes containing no additives or to compare the performance of shotcrete mixtures which contain additives that produce rapid setting or rapid stiffening of shotcrete.1.2 The values stated in SI units (see IEEE/ASTM SI 10) are the standard.This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

基本信息

标准号：
ASTM C1398-07
标准名称：
Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles (Withdrawn 2010)
英文名称：
Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles (Withdrawn 2010)
标准状态：
Withdrawn, No replacement
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
0 页
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
提出部门：
发布部门：

其它标准

推荐标准