
【国外标准】 Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)
本网站 发布时间:
2024-02-28
- ASTM F2642-08(2015)
- Withdrawn, Replaced
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This consumer safety specification includes requirements for safety instructions and labeling for recreational powered scooters and pocket bikes. Safety instructions shall be included with each unit and shall have the following: age and weight limit of the user, original design and configuration of the unit, operation of the unit, pre-operation checks, demonstration of unit, appropriate clothing and helmet, and maintenance. The maintenance instructions shall include: brake adjustments and service, tire inflation pressures, lubrication points including recommended lubricants, drive system specification and service instructions, frame inspection procedures, capacity by weight, maximum operating speeds, service and adjustment procedures for all components, and a phone number to secure maintenance or operating assistance from the manufacturer. Name and place of the business, manufacturer, importer, distributor, or seller shall be listed in the manual and on the retail box. Warning systems shall be in contrasting colors, permanent, conspicuous, and in sans serif style font.1.1 This consumer safety specification includes requirements for safe-use instructions and labeling to minimize the hazards to users of recreational powered scooters and pocket bikes. This specification is intended to cover safety instructions, labeling, and maintenance for products for:1.1.1 Children age eight to twelve for units limited to speeds 16 km/h (10 miles/h) or less, and1.1.2 Children age 13 and above for fast-moving units capable of achieving speeds of >16 km/h (>10 miles/h).1.2 This specification is intended to reduce hazards, other than those inherent to the users of these units during normal intended use and within manufacturers’ safety guidelines.1.3 This specification is not intended for non powered scooters (Consumer Safety Specification F2264), battery powered ride-on toys (Consumer Safety Specification F963), motorcycles, skateboards, all terrain vehicles (ATVs), go-karts (Practice F2007), fun-karts (Safety Guide F1928), snowmobiles, motorized trail bikes, lawn mowers, or motorized wheelchairs including mobility scooters.1.4 This specification is not intended for units designed for “Adult Use Only” and that are prominently labeled and marked as such.1.5 This specification is not intended for units designed or licensed for roadway use or regulated by transportation regulations (that is, Department of Transportation (DOT) or state).1.6 The values given in SI units are to be considered as the standard. The values given in parentheses are for information only.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM F2642-08(2015)
标准名称:
Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)
英文名称:
Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)标准状态:
Withdrawn, Replaced-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
- ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
- ASTM E3170/E3170M-18(2023) Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
- ASTM E3171-21a Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis
- ASTM E3178-18 Standard Practice for Evaluating Static and Cidal Chemical Decontaminants against Bacillus Spores using Centrifugal Filtration Tubes
- ASTM E3182-20 Standard Practice for Preparing an Occupant Exposure Screening Report (OESR) for Substances in Installed Building Products
- ASTM E3186-19 Standard Guide for Use and Testing of Dry-Block Temperature Calibrators
- ASTM E3191-18 Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination
- ASTM E3192/E3192M-20 Standard Practice for Soft Armor Conditioning by Tumbling
- ASTM E3197-23 Standard Terminology Relating to Examination of Fire Debris
- ASTM E3199-22a Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
- ASTM E3200-21 Standard Guide for Investment Analysis in Environmentally Sustainable Manufacturing
- ASTM E3208-20 Standard Specification for Minimum Equipment Requirements for Mobile Surface Contaminant Classification and Measurement Equipment
- ASTM E3209/E3209M-20 Standard Test Method for Pavement Thickness by Magnetic Pulse Induction
- ASTM E321-20 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)