
【国外标准】 Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of recreational powered scooters and pocket bikes intended for use by children age eight to twelve years, and adolescents age thirteen and above. This consumer safety specification is intended to minimize the risk of injury to an occupant from the normal use and reasonably foreseeable misuse of these e-mobility products.1.2 For purposes of definition, a recreational powered scooter is a battery-powered motorized recreational vehicle that has two or more wheels, a low platform, a vertical element for the user to grasp, and a method of steering. Recreational powered scooters for children and adolescents are limited to speeds of 16 km/h (10 mph) or less for children age eight to twelve years, and adolescents age thirteen and above for fast-moving products capable of achieving speeds of 32 km/h (20 mph).1.3 For purposes of definition, a pocket bike is a motorized two-wheel vehicle designed for a single occupant in the seated position typically designed to look like a motorcycle but scaled down to one quarter to one half the size of a typical motorcycle and not intended for use on public roads. Pocket bikes for children and adolescents are limited to speeds of 16 km/h (10 mph) or less for children age eight to twelve years, and adolescents age thirteen and above for fast-moving products capable of achieving speeds of 32 km/h (20 mph).1.4 This consumer safety specification is not intended for:1.4.1 Products designed and sold as “Adult Use Only” and are prominently labeled and marked as such;1.4.2 Commercial electric-powered scooters (for example, shared or rented devices) for adults;1.4.3 Bicycles tricycles;1.4.4 Non-powered scooters (Consumer Safety Specification F2264);1.4.5 Battery powered ride-on toys (Consumer Safety Specification F963);1.4.6 Motorcycles, skateboards, all-terrain vehicles, go-karts (Practice F2007);1.4.7 Concession go-karts;1.4.8 Recreational and commercial fun-karts;1.4.9 Snowmobiles, motorized trail bikes, lawn mowers, motorized wheelchairs including mobility scooters; or1.4.10 Products designed or licensed for roadway use regulated by transportation regulations (such as those promulgated by the U.S. Department of Transportation or similar state agencies or the National Highway Traffic Safety Administration).1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with recreational powered scooters and pocket bikes and the user while these are in use.1.6 No product covered by this specification produced after the approval date of this consumer safety specification shall, by label, marking, or other means, indicate compliance with this consumer safety specification unless it conforms to all requirements herein.1.7 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.1.8 The following precautionary caveat pertains only to the test methods portion (Section 7) of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2641-23
标准名称:
Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
英文名称:
Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D8223-19 Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
- ASTM D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
- ASTM D8226-21ae1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
- ASTM D8227-20 Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D823-18(2022) Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
- ASTM D8232-18 Standard Test Procedures for Measuring the Inclination of Deep Foundations
- ASTM D8236-18 Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
- ASTM D8239-23 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
- ASTM D8240-22e1 Standard Specification for Less-Flammable Synthetic Ester Liquids Used in Electrical Apparatus
- ASTM D8241/D8241M-19 Standard Tables of Body Measurements for Young Men Type, Size Range 32 – 48
- ASTM D8243-19 Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
- ASTM D8247-19 Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection
- ASTM D8252-23 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
- ASTM D8253-21 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy
- ASTM D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester