
【国外标准】 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This test method is intended for use by those in the waste management industries for the determination of apparent specific gravity and bulk density of waste.5.2 The apparent specific gravity and bulk density determined by this test method can be used for the conversion of measured volumes to weights.5.3 The apparent specific gravity and bulk density, when correlated with other properties, can be used to indicate the character of the waste.1.1 This test method covers the determination of apparent specific gravity and bulk density in a waste sample. For the purpose of this test method, the property to be measured is classified into three groups based on material type:1.1.1 Group A—Free-flowing liquids; apparent specific gravity (ASG),1.1.2 Group B—Granules, powders, and water-reactive liquids, solids, or sludges; bulk density (BD), and1.1.3 Group C—Bulk solids (such as gravel, paper, or wood, etc.); apparent specific gravity (ASG).1.2 This test method is designed and intended as a screening test to complement the more sophisticated quantitative analytical techniques that may be used to determine specific gravity. This test method offers to the user the option and the ability to screen waste for apparent specific gravity or bulk density when the more sophisticated techniques are not available and the total waste composition is unknown.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D5057-17
标准名称:
Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
英文名称:
Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 60598.2.17:2006 Luminaires Particular requirements - Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)(IEC 60598.2.17, Ed. 1.0 (1984) MOD)
- AS/NZS 60745.2.17:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- ASTM A1009-18 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
- ASTM A101-04(2019) Standard Specification for Ferrochromium
- ASTM A1010/A1010M-13(2018) Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
- ASTM A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
- ASTM A1015-01(2018) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
- ASTM A1016/A1016M-23 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes