
【国外标准】 IEEE Approved Draft Trial-Use Recommended Practice for Pulse-Type Partial Discharge Measurements on Individual Stator Coils and Bars
本网站 发布时间:
2025-06-05
- IEEE P2465
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This document describes pulse-type partial discharge (PD) test methods for individual form-wound stator coils and bars that are equipped with PD suppression coatings and energized using a sinusoidal voltage source. It includes a procedure for measurement in terms of apparent charge at frequencies below 1 MHz. It also includes a procedure for measurements in millivolts at higher frequencies up to 300 MHz. This document does not provide pass/fail criteria.
标准号:
IEEE P2465
标准名称:
IEEE Approved Draft Trial-Use Recommended Practice for Pulse-Type Partial Discharge Measurements on Individual Stator Coils and Bars
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 1301.P10rp-1986 Methods of test for pulp and paper (metric units) Determination of moisture in wood chips - Distillation method
- AS 1301.P11s-1978 Methods of test for pulp and paper (metric units) Klason lignin in wood and pulp
- AS 1301.P201m-1986 Methods of test for pulp and paper (metric units) Kappa number of pulp
- AS 1301.P414m-1986 Methods of test for pulp and paper (metric units) Conditioning of paper for testing
- AS 1629P-1979/Amdt 1-1994 Scorched particle standards for dry milk
- ASTM E2465-23 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM F2465/F2465M-24 Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
- KS C IEC IEEE 61850-9-3 전력 유틸리티 자동화를 위한 통신 네트워크 및 시스템 — 제9-3부: 전력 유틸리티 자동화를 위한 정밀 시간 프로토콜 프로파일
- KS C IEC IEEE 61850-9-3(2024 Confirm) 전력 유틸리티 자동화를 위한 통신 네트워크 및 시스템 — 제9-3부: 전력 유틸리티 자동화를 위한 정밀 시간 프로토콜 프로파일
- KS K ISO 105-P02(2023 Confirm) 텍스타일 — 염색 견뢰도 시험 — 제P02부: 주름잡기 가공에 대한 염색 견뢰도: 스팀 주름잡기 가공
- KS P ISO 12189(2019 Confirm) 외과용 이식재-이식성 척추기기의 기계시험-전방지지대를 이용한 척추 이식재 조립품에 대한 피로시험방법
- KS P ISO 12189(2024 Confirm) 외과용 이식재-이식성 척추기기의 기계시험-전방지지대를 이용한 척추 이식재 조립품에 대한 피로시험방법
- KS P ISO 12865 안과용 기구 — 검영기
- KS P ISO 12867 안과용 기구 — 시험테
- KS P ISO 12891-2 외과용 이식재의 회수 및 분석 — 제2부: 회수된 외과용 이식재의 분석