- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国家标准 >>
- J91 >>
- GB/T 28239-2012e 非道路用柴油机燃料消耗率和机油消耗率限值及试验方法
【国家标准】 非道路用柴油机燃料消耗率和机油消耗率限值及试验方法
本网站 发布时间:
2024-03-12
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
文前页下载
适用范围:
This national standard specifies the limits and measurement methods for weighted specific fuel consumption and specific oil consumption of non-road diesel engines.
This national standard is applicable to non-road diesel engines (hereinafter referred to as diesel engines) with power ratings of 560 kW and below,used e.g. for land applications (excluding road vehicles,tri-wheel and low-speed goods vehicles),ships,agricultural tractors,forestry machinery,construction equipment,generating sets and water pumping sets,excluding the marine diesel engiens fueled with heavy oil.
NOTE:The diesel engines exported from China shall be subject to the standards and regulations on the limits for specific fuel consumption specified by the importing countries or regions.
This national standard is applicable to non-road diesel engines (hereinafter referred to as diesel engines) with power ratings of 560 kW and below,used e.g. for land applications (excluding road vehicles,tri-wheel and low-speed goods vehicles),ships,agricultural tractors,forestry machinery,construction equipment,generating sets and water pumping sets,excluding the marine diesel engiens fueled with heavy oil.
NOTE:The diesel engines exported from China shall be subject to the standards and regulations on the limits for specific fuel consumption specified by the importing countries or regions.
标准号:
GB/T 28239-2012e
标准名称:
非道路用柴油机燃料消耗率和机油消耗率限值及试验方法
英文名称:
Limits and measurement methods for non-road diesel engine specific fuel consumption and specific oil consumption标准状态:
被代替-
发布日期:
2012-03-09 -
实施日期:
2013-01-01 出版语种:
英文
起草人:
起草单位:
归口单位:
SAC/TC 177 Technical Committee on Internal Combustion Engines of Standardization Administration of China.提出部门:
China Machinery Industry Federation.发布部门:
General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China and Standardization Administration of the People's Republic of China
- 推荐标准
- 国家标准计划
- GB/T 20064.1-2023 往复式内燃机 手柄起动装置 第1部分:安全要求和试验
- GB/T 9485-2023 径流式涡轮增压器 联接尺寸
- GB/T 14097-2023 往复式内燃机 噪声限值
- GB/T 25364.1-2021 涡轮增压器密封环 第1部分:技术条件
- GB/T 25364.2-2021 涡轮增压器密封环 第2部分:检验方法
- GB/T 8243.12-2021 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量
- GB/T 38750.1-2020 往复式内燃机能效评定规范 第1部分:柴油机
- GB/T 38750.2-2020 往复式内燃机能效评定规范 第2部分:汽油机
- GB/T 28239-2020 非道路用柴油机燃料消耗率限值及试验方法
- GB/T 8243.14-2020 内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验
- GB/T 37692-2019e 非道路移动机械用小型点燃式发动机工况法燃料消耗率限值与测量方法
- GB/T 37692-2019 非道路移动机械用小型点燃式发动机工况法燃料消耗率限值与测量方法
- GB/T 37170-2018 固定式燃气发动机安全技术规范
- GB/T 37170-2018e 固定式燃气发动机安全技术规范
- GB/T 23341.1-2018 涡轮增压器 第1部分:一般技术条件