【国外标准】 Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates (Withdrawn 2001)
本网站 发布时间:
2024-02-28
- ASTM D1083-91(1998)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
1.1 These test methods are suitable for testing the integrity of large shipping cases and unitized loads as well as the ability of the contents to endure normal handling. Not all of the methods are applicable to all products, containers, and loads. The test methods described are applicable to common means of material handling including: forklift, pull pack, clamp truck, crane, and spade lift type handling systems as follows: 1.1.1 Drop Test -For measuring the ability of the case or unitized load to withstand rough handling and provide information useful in improving the design of the container (see 9.1.2 and 10.1). 1.1.2 Spade Lift Test -For lifting by spade lift attachment to determine the ability of the handling flap of the case or shipping unit to withstand repeated lifting and handling by this method (see 9.2). 1.1.3 Clamp Lift Test -For lifting by hydraulic clamp attachment, to determine the ability of the case or shipping unit, to withstand squeeze clamp handling consisting of repeated side compressions and lifting (see 9.3). 1.1.4 Push-Pull Handling Test -For testing the ability of the slip sheet tab to withstand repeated pulls by the gripper jaws without tearing (see 9.4). 1.1.5 Grabhook Test -For lifting by grabhooks to determine the ability of the case or unitized load to withstand the horizontal pressures of grabhooks (see 10.2). 1.1.6 Sling Test -For lifting by wire rope, cable, or woven fiber slings to determine the ability of the case or unitized load to withstand the compression of slings (see 10.3). 1.1.7 Tip Test -For determining the ability of tall or top heavy cases or crates to resist tipping over (see Section 11). 1.1.8 Tipover Test -For determining the ability of filled large shipping containers to resist the impacts associated with tipover hazards, and for determining the ability of the packaging and packing methods to provide protection to the contents, when the pack is tipped over (see Section 12). Note 1-This test method fulfills the requirements of International Organization for Standardization standard ISO 8768. The ISO standard may not meet the requirements for this test method.> 1.1.9 Rolling Test -For determining the ability of a complete, filled transport package to withstand the effects of rolling (see Section 13). Note 2-This test method fulfills the requirements of International Organization for Standardization standard ISO 2876. The ISO standard may not meet the requirements for this test method.> 1.2 Additional Test Procedures: 1.2.1 Additional tests that apply to mechanical handling of unitized loads and large cases and crates include incline impact tests, described in Test Method D880 and horizontal impact tests, described in Test Method D4003. Test Method D4003 includes a special pallet marshalling test and Test Method D1185 provides test methods for pallets and related structures. 1.2.2 Test Method D4169 provides a series of options for selecting and running performance tests on all types of shipping containers and systems. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.>
标准号:
ASTM D1083-91(1998)
标准名称:
Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates (Withdrawn 2001)
英文名称:
Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates (Withdrawn 2001)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard