
【国外标准】 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
本网站 发布时间:
2023-12-22
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS 7024-2:1988
标准名称:
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
英文名称:
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides标准状态:
被代替-
发布日期:
1989-02-28 -
实施日期:
出版语种:
- 其它标准
- 上一篇: BS 7024-1:1988 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
- 下一篇: BS 7024-3:1988 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
- 推荐标准
- ASTM E2760-19e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
- ASTM B2-13(2018) Standard Specification for Medium-Hard-Drawn Copper Wire
- ASTM C1872-18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
- ASTM C400-19(2024)e2 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
- ASTM D2937-17e2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM E3076-18e2 Standard Practice for Determination of the Slope in the Linear Region of a Test Record
- ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
- ASTM F1988-99(2020) Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
- ASTM F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
- ASTM F2819-10(2015)e2 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
- ASTM G110-92(2022)e2 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
- ASTM ISO/ASTM52943-2-24 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc