我的标准
购物车
400-168-0010
【国外标准】 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
本网站 发布时间：
2023-12-22
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
BS 7024-3:1988
标准名称：
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
英文名称：
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides标准状态：
现行-
发布日期：
1989-02-28 -
实施日期：
出版语种：
- 其它标准
- 上一篇： BS 7024-2:1988 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides
- 下一篇： BS 7025:1988 Method for preparation of test codes of engineering grade for measurement at the operator's or bystander's position of noise emitted by machinery
- 推荐标准
- ASTM A3-01(2019) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
- ASTM B3-13(2018) Standard Specification for Soft or Annealed Copper Wire
- ASTM E2472-12(2018)e3 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM F1988-99(2020) Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
- ASTM ISO/ASTM52911-3-23 Additive manufacturing — Design — Part 3: PBF-EB of metallic materials
- ASTM ISO/ASTM52926-3-23 Additive manufacturing of metals — Qualification principles — Part 3: Qualification of operators for PBF-EB
- INCITS 137-1988[S2008] Information Systems v One- and Two-sided, Unformatted, 90-mm (3.5-in), 5.3-tpmm (135-tpi) Flexible Disk Cartridge for 7958 BPR Use v General, Physical, and Magnetic Requirements (formerly ANSI X3.137:1988/AM1-1999)
- INCITS 163-1988 (S2017) Information Systems - Contact Start/Stop Metallic Film Storage Disk - 83,333 Flux Transitions Per Track, 130-mm (5.118-in) Outer Diameter and 40-mm (1.575-in) Inner Diameter
- INCITS 371.3-2003[S2013] Information technology - Real Time Locating Systems (RTLS) Part 3: Application Programming Interface
- INCITS 504-3-2016 Information Technology - Generic Identity Command - Part 3: GICS Platform Testing Requirements
- INCITS/ISO 19160-3:2020 (2020) Addressing - Part 3: Address Data Quality
- INCITS/ISO 4232-3-1984 Office Machines - Minimum Information to be Included in Specification Sheets - Part 3: Postal Franking Machines (formerly ANSI/ISO 4232-3-1984)
- INCITS/ISO 6936:1988 (R2019) Information Processing - Conversion between the Two Coded Character Sets of ISO 646 and ISO 6937-2 and the CCITT International Telegraph Alphabet No. 2 (ITA 2)
- INCITS/ISO 8378-3-1986 (R2018) Information Processing - Data Interchange On 130 Mm (5.25 In) Flexible Disk Cartridges Using Modified Frequency Modulation Recording At 7 958 Ftprad, 3,8 Tpmm (96 Tpi), On Both Sides - Part 3: Track Format B
- INCITS/ISO 9542:1988 (R2022) Information processing systems -- Telecommunications and information exchange between systems -- End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
