您的位置：
中国标准在线服务网 >>
全部标准分类 >>
国外标准 >>
ASTM >>
ASTM D8223-19 Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber

【国外标准】 Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber

本网站发布时间： 2024-02-28

ASTM D8223-19
Active
定价：590元
加购物车
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

5.1 Design values obtained from 4.2 are permitted for use in design where the end-use temperature does not exceed 38 °C (100 °F).5.1.1 The mean test values for the properties evaluated in 4.2 (ftr,0) and 4.3 (ftr,108) shall be used to determine design value adjustment factors for FRT LVL that will be exposed to end-use temperatures in excess of 38 °C (100 °F) but not exceeding 66 °C (150 °F). Temperature adjustment factors in accordance with the National Design Specification for Wood Construction (NDS) shall also be applied in these applications.1.1 This practice covers procedures for the evaluation of laminated veneer lumber (LVL) pressure-treated with commercially available fire retardants after exposure to both standard environmental conditions and an extended exposure to elevated temperature.1.2 LVL products utilizing overlays or fire-retardant paints and coatings require other considerations and are outside of the scope of this practice.1.3 LVL products manufactured for rim board applications require other considerations and are outside of the scope of this practice.1.4 This practice provides one method to establish design values for fire-retardant treated (FRT) LVL. It is not intended to preclude the use of alternative methods for deriving design values, such as Test Method D5664 and Practice D6841 for FRT lumber.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

基本信息

标准号：
ASTM D8223-19
标准名称：
Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
英文名称：
Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
标准状态：
Active
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
71.100.50
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
5 页
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
D07.07
提出部门：
发布部门：

其它标准

推荐标准