- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国家标准 >>
- H25 >>
- GB/T 28291-2012e 电镀锡钢板表面涂油量试验方法
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
文前页下载
适用范围:
This document specifies test principles,reagent,test apparatus,samples,test conditions and procedures,calculation of test results,test report for the determination of the surface oil in electrolytic tinplate by solvent extraction method,hydrophil balance method and elliptically polarized light method.
This document is applicable to the determination of surface oil in electrolytic tinplate.It may also applies to the determination of surface oil in electrolytic tinplate chromium plate (TFS).The solvent extraction method is used as arbitration method .
This document is applicable to the determination of surface oil in electrolytic tinplate.It may also applies to the determination of surface oil in electrolytic tinplate chromium plate (TFS).The solvent extraction method is used as arbitration method .
标准号:
GB/T 28291-2012e
标准名称:
电镀锡钢板表面涂油量试验方法
英文名称:
Methods for determination of surface oil on electrolytic tinplate标准状态:
现行-
发布日期:
2012-05-11 -
实施日期:
2013-02-01 出版语种:
英文
起草人:
起草单位:
归口单位:
SAC/TC 183 Natinonal Technical Committee on Steel of Standardization Administration of China.提出部门:
China Iron and Steel Industry Association.发布部门:
General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China and Standardization Administration of the People's Republic of China
- 其它标准
- 推荐标准
- GB/T 46054-2025 金属和合金的腐蚀 电化学测量 监测大气腐蚀的试验方法
- GB/T 46055-2025 金属和合金的腐蚀 金属和合金深海腐蚀试验导则
- GB/T 46066-2025 金属和合金的腐蚀 在三氯化铁溶液中圆柱形试样临界缝隙腐蚀温度的测量
- GB/T 46164-2025 金属和合金的腐蚀 增材制造钛合金电化学临界局部腐蚀温度(E-CLCT)的测量
- GB/T 46170-2025 金属和合金的腐蚀 土壤加速试验
- GB/T 46198-2025 金属和合金的腐蚀 海上风能结构的阴极保护
- GB/T 46215-2025 金属和合金的腐蚀 用目测法和硬度法对电厂部件铜合金和灰铸铁的选择性腐蚀评价
- GB/T 16545-2025 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除
- GB/T 18590-2025 金属和合金的腐蚀 点蚀评价指南
- GB/T 19747-2025 金属和合金的腐蚀 双金属大气暴露腐蚀评定
- GB/T 45879-2025 金属和合金的腐蚀 应力腐蚀敏感性电化学快速试验方法
- GB/T 46052-2025 金属和合金的腐蚀 潮湿大气中的二氧化硫试验(固定气体法)
- GB/T 31316-2014 海水阴极保护总则
- GB/T 31933-2015 模拟海洋环境钢筋耐蚀试验方法
- GB/T 3246.1-2024 变形铝及铝合金制品组织检验方法 第1部分:显微组织检验方法
我的标准
购物车
400-168-0010










