- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国家标准 >>
- J74 >>
- GB/T 24159-2022e 焊接绝热气瓶
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

文前页下载
适用范围:
This document defines the symbols of welded insulated cylinders (hereinafter referred to as cylinder), and specifies the designation method, general parameters, materials, design, manufacturing, test methods, inspection rule, type test, mark, packing, transportation, information, and data retention.
This document is applicable to refillable cylinders used at normal ambient temperature(-40 ℃-60 ℃),with a nominal volume range of 10 L-1 000 L for storage of liquid oxygen, liquid nitrogen, and liquid argon , and the nominal volume range of 150 L-1 000 L for storage of liquefied natural gas(LNG),the design temperature not higher than -196 ℃, the nominal working pressure of 0.2 MPa-3.5 MPa.
Cylinders storing liquid carbon dioxide and liquid nitrous oxide may be manufactured and inspected with reference to this document.
This document is applicable to refillable cylinders used at normal ambient temperature(-40 ℃-60 ℃),with a nominal volume range of 10 L-1 000 L for storage of liquid oxygen, liquid nitrogen, and liquid argon , and the nominal volume range of 150 L-1 000 L for storage of liquefied natural gas(LNG),the design temperature not higher than -196 ℃, the nominal working pressure of 0.2 MPa-3.5 MPa.
Cylinders storing liquid carbon dioxide and liquid nitrous oxide may be manufactured and inspected with reference to this document.
标准号:
GB/T 24159-2022e
标准名称:
焊接绝热气瓶
英文名称:
Welded insulated cylinders标准状态:
现行-
发布日期:
2022-07-11 -
实施日期:
2023-02-01 出版语种:
英文
起草人:
起草单位:
归口单位:
National Technical Committee 31 on Cylinders of Standardization Administration of China(SAC/TC 31).提出部门:
National Technical Committee 31 on Cylinders of Standardization Administration of China(SAC/TC 31).发布部门:
State Administration for Market Regulation and Standardization Administration of the People's Republic of China
- 其它标准
- 上一篇: GB/T 24159-2022 焊接绝热气瓶
- 下一篇: GB/T 2416-1981 东北细毛羊
- 推荐标准
- GB/T 17925-2024 气瓶对接焊缝X射线数字成像检测
- GB/T 45439-2025 燃气气瓶和燃气瓶阀溯源二维码应用技术规范
- GB 5842-2023 液化石油气钢瓶
- GB/T 10878-2011 气瓶锥螺纹丝锥
- GB/T 38109-2019 承压设备安全附件及仪表应用导则
- GB/T 38343-2019 法兰接头安装技术规定
- GB/T 24159-2022 焊接绝热气瓶
- GB/T 24159-2022e 焊接绝热气瓶
- GB/T 25198-2023 压力容器封头
- GB/T 26610.1-2022 承压设备系统基于风险的检验实施导则 第1部分:基本要求和实施程序
- GB/T 26610.2-2022 承压设备系统基于风险的检验实施导则 第2部分:基于风险的检验策略
- GB/T 26610.3-2014 承压设备系统基于风险的检验实施导则 第3部分:风险的定性分析方法
- GB/T 27512-2011 埋地钢质管道风险评估方法
- GB/T 27513-2011 载人低压舱
- GB/T 28051-2011 焊接绝热气瓶充装规定