1.1 This consumer safety specification covers the performance requirements and methods of test to ensure the satisfactory performance of the booster seat.1.2 This consumer safety specification is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of booster seats.NOTE 1: This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of older children with children in booster seats.1.3 For purposes of this consumer safety specification, a booster seat is a juvenile chair, which is placed on an adult chair to elevate a child to standard dining table height. The booster seat is made for the purpose of containing a child, up to 5 years of age, and normally for the purposes of feeding or eating. A booster seat may be height adjustable and include a reclined position.1.4 No booster seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.6 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of recreational powered scooters and pocket bikes intended for use by children age eight to twelve years, and adolescents age thirteen and above. This consumer safety specification is intended to minimize the risk of injury to an occupant from the normal use and reasonably foreseeable misuse of these e-mobility products.1.2 For purposes of definition, a recreational powered scooter is a battery-powered motorized recreational vehicle that has two or more wheels, a low platform, a vertical element for the user to grasp, and a method of steering. Recreational powered scooters for children and adolescents are limited to speeds of 16 km/h (10 mph) or less for children age eight to twelve years, and adolescents age thirteen and above for fast-moving products capable of achieving speeds of 32 km/h (20 mph).1.3 For purposes of definition, a pocket bike is a motorized two-wheel vehicle designed for a single occupant in the seated position typically designed to look like a motorcycle but scaled down to one quarter to one half the size of a typical motorcycle and not intended for use on public roads. Pocket bikes for children and adolescents are limited to speeds of 16 km/h (10 mph) or less for children age eight to twelve years, and adolescents age thirteen and above for fast-moving products capable of achieving speeds of 32 km/h (20 mph).1.4 This consumer safety specification is not intended for:1.4.1 Products designed and sold as “Adult Use Only” and are prominently labeled and marked as such;1.4.2 Commercial electric-powered scooters (for example, shared or rented devices) for adults;1.4.3 Bicycles tricycles;1.4.4 Non-powered scooters (Consumer Safety Specification F2264);1.4.5 Battery powered ride-on toys (Consumer Safety Specification F963);1.4.6 Motorcycles, skateboards, all-terrain vehicles, go-karts (Practice F2007);1.4.7 Concession go-karts;1.4.8 Recreational and commercial fun-karts;1.4.9 Snowmobiles, motorized trail bikes, lawn mowers, motorized wheelchairs including mobility scooters; or1.4.10 Products designed or licensed for roadway use regulated by transportation regulations (such as those promulgated by the U.S. Department of Transportation or similar state agencies or the National Highway Traffic Safety Administration).1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with recreational powered scooters and pocket bikes and the user while these are in use.1.6 No product covered by this specification produced after the approval date of this consumer safety specification shall, by label, marking, or other means, indicate compliance with this consumer safety specification unless it conforms to all requirements herein.1.7 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.1.8 The following precautionary caveat pertains only to the test methods portion (Section 7) of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

This consumer safety specification includes requirements for safety instructions and labeling for recreational powered scooters and pocket bikes. Safety instructions shall be included with each unit and shall have the following: age and weight limit of the user, original design and configuration of the unit, operation of the unit, pre-operation checks, demonstration of unit, appropriate clothing and helmet, and maintenance. The maintenance instructions shall include: brake adjustments and service, tire inflation pressures, lubrication points including recommended lubricants, drive system specification and service instructions, frame inspection procedures, capacity by weight, maximum operating speeds, service and adjustment procedures for all components, and a phone number to secure maintenance or operating assistance from the manufacturer. Name and place of the business, manufacturer, importer, distributor, or seller shall be listed in the manual and on the retail box. Warning systems shall be in contrasting colors, permanent, conspicuous, and in sans serif style font.1.1 This consumer safety specification includes requirements for safe-use instructions and labeling to minimize the hazards to users of recreational powered scooters and pocket bikes. This specification is intended to cover safety instructions, labeling, and maintenance for products for:1.1.1 Children age eight to twelve for units limited to speeds 16 km/h (10 miles/h) or less, and1.1.2 Children age 13 and above for fast-moving units capable of achieving speeds of >16 km/h (>10 miles/h).1.2 This specification is intended to reduce hazards, other than those inherent to the users of these units during normal intended use and within manufacturers’ safety guidelines.1.3 This specification is not intended for non powered scooters (Consumer Safety Specification F2264), battery powered ride-on toys (Consumer Safety Specification F963), motorcycles, skateboards, all terrain vehicles (ATVs), go-karts (Practice F2007), fun-karts (Safety Guide F1928), snowmobiles, motorized trail bikes, lawn mowers, or motorized wheelchairs including mobility scooters.1.4 This specification is not intended for units designed for “Adult Use Only” and that are prominently labeled and marked as such.1.5 This specification is not intended for units designed or licensed for roadway use or regulated by transportation regulations (that is, Department of Transportation (DOT) or state).1.6 The values given in SI units are to be considered as the standard. The values given in parentheses are for information only.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 0元 / 折扣价： 0 元

1.1 This consumer safety specification provides safety requirements for various types of home playground equipment intended for use by children aged from over 18 months through 10 years. It further provides such requirements for swings intended specifically for toddlers. Different age limits for various requirements are found in this specification. These limits reflect the nature of the hazards and the expected mental or physical ability, or both, of the child to cope with the hazards.1.2 Home playground equipment is defined as any product in which the support structure remains stationary while the activity is taking place and is intended for a child to perform any of the following activities: climbing, swinging, sliding, rocking, spinning, crawling, or creeping, or combination thereof. Fitness equipment is specifically excluded unless attached to the play equipment. This specification is not intended to apply to juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds, or furniture (including outdoor furniture, such as picnic tables, cradle rockers, activity centers being used as walker substitutes, bouncers, jumpers, infant carriers, and products specifically designed for therapeutic use). This specification is not intended to apply to equipment to be used in places of public assembly such as schools, nurseries, day-care centers, and parks. Equipment intended to be in child-care centers in private homes is not exempt from the requirements of this specification. Such centers are defined as situations in which the child-care provider does not care for more than six children under the age of ten that are not residing in the household of the caregiver, and the total number of children under the age of ten does not exceed ten, including the caregiver's own children. Electrically operated constant air inflatable devices are exempted from the requirements of this specification. Free standing play houses are exempt from this standard where the intent is that the child is standing or seated with their feet on the ground with no climbing, sliding, or swinging activities.1.3 Methods of identifying products that comply with this consumer safety specification are given. The illustrations of home playground equipment shown in Figs. A1.1-A1.4 are for informational purposes only and are not intended to limit or endorse certain types of playground equipment or equipment features. These illustrations are not intended to limit the variety or various combinations of equipment that are covered by this consumer safety specification.1.4 The purpose of this specification is to reduce the likelihood of life-threatening or debilitating injuries.1.5 If toy accessories or toy chests are attached to home playground equipment, they are applicable to this consumer safety specification and to any other applicable safety standards.NOTE 1: See Annex A1 for figures referenced throughout this consumer safety performance specification.1.6 General Measures, Tolerances, and Conversions: 1.6.1 The general tolerances for this specification (unless otherwise specified) are as follows:Dimension ToleranceX in. ±0.5 in.X.X in. ±0.05 in.X.XX in. ±0.005 in.Angle: ± 1°Force in N: ±1.125 lbf (±5 N)Weight in lbs: <220 lb (100 kg) ±1 lb (0.45 kg)Weight in lbs. >220 lb (100 kg) ±2 lb (0.90 kg)These tolerances apply to all dimensions unless otherwise stated or when listed using terms like greater than, less than, minimum, or maximum are used.1.6.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only.1.6.3 The metric conversion factors:inch (in.) to millimetre (mm): 1 in. = 25.4 mmpound (lb) to kilogram (kg): 1 lb  = 0.45359 kgpound-force (lbf) to newton (N): 1 lbf = 4.4482 N1.6.4 See Annex A1 for figures referenced throughout this specification.1.7 This consumer safety performance specification includes the following sections: Section 1Referenced Documents Section 2Terminology Section 3Materials and Manufacture Section 4General Requirements Section 5Performance Requirements Section 6Requirements for Access Section 7Equipment Section 8Equipment Layout Section 9Installation Section 10Structural Integrity Section 11Maintenance Instructions Section 12Labeling and Signage Section 13Information Section 14Keywords Section 151.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 918元 / 折扣价： 781 元 加购物车

This specification covers the performance requirements, test methods, and labeling requirements to promote the safe use of infant bath tubs. The performance requirements; restraint system, static load, suction cups requirements shall be discussed. Locking mechanism, protective components, torque, label permanence, warning permanence, static load, and suction cup shall be tested to meet the requirements prescribed.1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bath tubs. It also covers slings, pads, inserts, and similar accessories when such accessories are used with the infant bath tub.1.2 This consumer safety specification is intended to reduce the risk of death and minimize injury to infants resulting from use and reasonably foreseeable abuse of infant bath tubs and infant bath tub accessories.1.3 No infant bath tub or infant bath tub accessory produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 The following precautionary caveat pertains only to the test methods portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

1.1 This consumer safety specification establishes performance requirements, test methods, and marking requirements to promote safe use of a hand-held infant carrier by an occupant and caregiver.1.2 This consumer safety specification is intended to minimize the risk of incidents to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of a hand-held infant carrier.1.3 No hand-held infant carrier produced after the approval date of this consumer safety specification, either by label or other means, shall indicate compliance with this specification, unless it conforms to all requirements contained herein.1.4 This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of other persons with the child occupant in a hand-held infant carrier or the accidents resulting from abuse and misuse by children able to walk.1.5 This consumer safety specification is not intended to address incidents or injuries resulting from use of the product in a motor vehicle, nor is it intended to address any issues that may arise from the manufacturer meeting the certification requirements of 49 CFR 571.213 or other applicable add-on child restraint standards.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of bassinets and cradles.1.2 This consumer safety performance specification is intended to minimize the risks of incidents to an infant resulting from normal use and reasonably foreseeable misuse of a bassinet or cradle.1.3 This consumer safety performance specification covers products primarily intended to provide sleeping accommodations for an infant up to approximately 5 months in age or when the child begins to push up on hands and knees, whichever comes first.1.3.1 Examples of Products under the :1.3.1.1  Bassinets, cradles, compact bassinets, and compact cradles.1.3.1.2 Cradle swings with an incline less than or equal to 10° from horizontal while in the rest (non-rocking) position.1.3.1.3 Multi-use products when they are in the bassinet/cradle or compact bassinet/cradle use mode as defined in 3.1.1 or 3.1.3.1.3.1.4 Bassinet/cradle accessories to products when removed from the product and used in the bassinet/cradle mode or as a compact bassinet/cradle product. See 3.1.2 for an example.1.3.1.5 Bassinet/cradle features for carriage/stroller when removed from the carriage/stroller and used in the bassinet/cradle mode or compact bassinet/cradle product mode.1.3.2 Examples of Products Excluded from the : 1.3.2.1 Sleep products that have only inclined sleeping surfaces intended to be greater than 10° from horizontal while in the rest (non-rocking) position.1.3.2.2 In-bed portable sleepers.1.3.2.3 Enclosed travel tents.1.4 No bassinet or cradle produced after the approval date of this consumer safety performance specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 This consumer safety performance specification is not intended to address incidents and injuries resulting from alteration or unreasonable abuse or misuse of the product by a child or child care giver.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion Section 7 of this consumer safety performance specification This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.FIG. 1 CAMI Infant Dummy, Mark II 17.5 lb (7.9 kg)FIG. 2 CAMI Newborn Dummy 7.5 lb (3.4 kg)1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 843元 / 折扣价： 717 元 加购物车

1.1 This consumer safety performance specification establishes safety performance requirements, test methods, and requirements for labeling to minimize the identified hazards to children presented by infant bedding and related accessories as identified in the introduction.1.2 Infant bedding and related accessories includes the following items intended for use in a nursery: fitted sheets, blankets, dust ruffles, covers and drapes for canopies, pillows, mattress covers, diaper stackers, fabric wall hangings, crib bumper/liners, and comforters.1.3 No infant bedding or related accessory produced after the approval date of the consumer safety performance specification shall indicate, either by label or other means, compliance with this specification unless it conforms to all applicable requirements contained herein.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

1.1 This consumer safety specification covers all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods, or gas matches) and such similar devices as defined in 3.1.14. Matches are specifically excluded from this specification; flame-producing products intended for igniting cigars, pipes, and cigarettes are also specifically excluded from this safety specification and are covered in Consumer Safety Specification F400.1.2 This specification establishes requirements for utility lighters to ensure a reasonable degree of safety for normal use and reasonably foreseeable misuse of such utility lighters by users.1.3 Utility lighters, being flame-producing devices, as do all flame sources, present a potential hazard to the user. This specification cannot eliminate all hazards, but it is intended to minimize potential hazards of utility lighters to users.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 646元 / 折扣价： 550 元 加购物车

This specification establishes recognized requirements for determining the child resistance of portable gasoline containers intended for use by consumers. The following tests shall be performed: senior adult test; child-resistant test (test subject/selection criteria); child-resistant tests (test failures); sequential test; and senior adult use effectiveness to conform with the specified requirements.1.1 This specification establishes recognized requirements for determining the child resistance of portable fuel containers (PFCs) and other types of portable containers intended for use by consumers to hold, store, and transport liquid fuels such as gasoline, kerosene, and diesel.1.1.1 “Portable Fuel Container” is defined in Specification F852 and includes the receptacle for gasoline, kerosene, or diesel fuel as well as spouts, caps, and other closure mechanisms and components for use with or on portable gasoline, kerosene, or diesel receptacles.1.1.2 This specification is also applicable to spouts, caps, or other closure mechanisms sold separately for use with or on a fuel container.1.1.3 This specification does not cover one-time use portable emergency fuel containers conforming to Specification F2874.1.2 This standard addresses the effectiveness of the child resistance (CR) device only after closure cycling, but does not address closure effectiveness:1.2.1 When at high or low temperatures,1.2.2 After thermal aging of polymers,1.2.3 After exposure to sunlight,1.2.4 After exposure to intended fuels, and1.2.5 After physical abuses, such as drops or impacts.NOTE 1: Please see Appendix X2 for additional information on these exemptions.1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 590元 / 折扣价： 502 元 加购物车

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to infants presented by infant inclined sleep products as identified in the introduction.1.2 This consumer safety specification is intended to minimize the risk of injuries to infants resulting from normal use and reasonably foreseeable misuse or abuse of infant inclined sleep products.1.3 This consumer safety performance specification covers a free standing product with an inclined sleep surface primarily intended and marketed to provide sleeping accommodations for an infant up to 5 months old or when the infant begins to roll over or pull up on sides, whichever comes first. It also covers a smaller product intended for newborns up to 3 months old or when newborn begins to wiggle out of position or turn over in the product or weighs more than 15 lb (6.8 kg), whichever comes first. It also covers infant and newborn inclined sleep product accessories, which are attached to, or supported by, another product with the same age or abilities, or both, as the free standing products. If the inclined sleep product can be converted into a product for which another ASTM standard consumer safety specification exists, the product shall meet the applicable requirements of that standard. For example, an inclined sleep product that can have the recline angle adjusted below 10° shall also comply with the applicable requirements of Consumer Safety Specification F2194.1.4 No infant inclined sleep product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 0元 / 折扣价： 0 元

1.1 This guide relates to the use and maintenance of commercially manufactured fun-karts intended for private use, on suitable off-road terrain, by consumers.1.2 This guide is intended to reduce hazards, other than those inherent in the sport of fun-karting, to the users of fun-karts during normal intended use.1.3 This guide applies to fun-karts for private use and does not apply to concession, race, home-made, consumer-modified karts, karts that are pedal-powered, unpowered karts, or karts that are used for commercial purposes.1.4 This guide specifically recognizes that there are operational hazards relating to fun-karts that operators and passengers are deemed to have accepted by their use and operation of the fun-kart including, but not limited to, falling out, running into, through, under or over objects, upsetting the kart, general operator recklessness, pinches, scratches, or bruises, or a combination thereof.1.5 This guide does not cover product performance or quality, labeling, maintenance, or safety devices.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

定价： 515元 / 折扣价： 438 元 加购物车

This specification deals with nationally recognized requirements for the cautionary information to be placed on the label of portable kerosine and diesel containers for consumer use. It is not the intent of this specification to preclude any other labeling requirements, such as those set forth in Federal Hazardous Substances Act (FHSA) or other applicable regulations and standards. Information on warning labels which appear on the containers will help ensure the proper information is being presented to the consumer, concerning methods of handling kerosine and diesel fuels.1.1 This specification establishes nationally recognized requirements for the cautionary information to be placed on the label of portable kerosine and diesel containers for consumer use. It is not the intent of this specification to preclude any other labeling requirements, such as those set forth in Federal Hazardous Substances Act (FHSA) or other applicable regulations and standards.

定价： 0元 / 折扣价： 0 元

This specification establishes nationally recognized performance requirements for portable gasoline, kerosene, and diesel fueling systems intended for reuse by the consumer in filling, transport, dispensing, and storage. This specification defines performance requirements for systems that can effectively reduce fuel spillage and emissions when used in accordance with the manufacturer's (marked) warnings, operating instructions, and limitations of use. Permeability, flow rate, and fill level shall conform to the requirements specified. Spout samples shall be subjected to the following tests in order to determine their overall performance: leakage test, operation test, elevated temperature test, bending moment test, cyclic endurance test, pull test, closure test, drop test, immersion test, aging test, xenon arc type light exposure test, and water exposure test.1.1 This specification establishes nationally recognized performance requirements for portable gasoline, kerosene, and diesel fueling systems intended for reuse by the consumer in filling, transport, dispensing, and storage. This specification does not cover single-trip prepackaged containers.1.2 This specification defines performance requirements for systems that can effectively reduce fuel spillage and emissions when used in accordance with the manufacturer's (marked) warnings, operating instructions, and limitations of use. This specification does not provide assurance that systems meeting the requirements are suited to all fueling applications and conditions.1.3 This specification is not a fire hazard standard. It concerns portable gasoline and kerosene containers for consumer use.1.4 Containers used with these systems shall meet all applicable requirements of either Specification F 852 or F 976 and additional requirements as specified in this standard.1.5 The following precautionary caveat applies only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

定价： 0元 / 折扣价： 0 元

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of soft infant and toddler carriers.1.2 This consumer safety specification is intended to minimize the risk of incidents to an infant from the normal use and reasonably foreseeable misuse of these products.1.3 For purposes of definition, a soft infant and toddler carrier is a product, normally of sewn fabric construction, which is designed to contain a full term infant to a toddler, generally in an upright position, in close proximity to the caregiver. In general, the child will weigh between 7 and 45 lb (3.2 and 22 kg). The soft infant and toddler carrier is normally “worn” by the caregiver with a child positioned in the carrier and the weight of the child and carrier suspended from one or both shoulders of the caregiver. These products may be worn on the front, side, or back of the caregiver's body with the infant either facing towards or away from the caregiver. This consumer safety specification does not include products generally referred to as “slings.”1.4 No soft infant and toddler carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein.1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and infant while the soft carrier is in use.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion, Section 7 of this consumer safety specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

定价： 590元 / 折扣价： 502 元 加购物车