- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国家标准 >>
- C45 >>
- GB 24436-2009e 康复训练器械 安全通用要求
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

文前页下载
适用范围:
This standard specifies terms and definitions of rehabilitation training instrument (hereinafter referred to as instrument), general requirements for safety and test methods, etc.
This standard is applicable to instruments that are used by persons with physical impairments in rehabilitation training in professional training areas or at home under the guidance of rehabilitation physicians or attendants.
This standard is applicable to instruments that are used by persons with physical impairments in rehabilitation training in professional training areas or at home under the guidance of rehabilitation physicians or attendants.
标准号:
GB 24436-2009e
标准名称:
康复训练器械 安全通用要求
英文名称:
Rehabilitation training instrument—General safety requirements标准状态:
现行-
发布日期:
2009-09-30 -
实施日期:
2009-12-01 出版语种:
英文
起草人:
起草单位:
归口单位:
SAC/TC 148 National technical committee of standardization for Rehabilitation and Special Equipment for Disabled Persons.提出部门:
the Ministry of Civil Affairs of the People’s Republic of China.发布部门:
General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China and Standardization Administration of the People's Republic of China
- 其它标准
- 推荐标准
- GB/T 14728.1-2024 双臂操作助行器 要求和试验方法 第1部分:框式助行器
- GB/T 12279.1-2024 心血管植入器械 人工心脏瓣膜 第1部分:通用要求
- GB/T 13074-2024 血液净化术语
- GB/T 20405.4-2025 失禁者用尿液吸收剂 聚丙烯酸酯高吸水性粉末 第4部分:用加热失重法测定水分含量
- GB/T 20405.5-2025 失禁者用尿液吸收剂 聚丙烯酸酯高吸水性粉末 第5部分:在盐溶液中用称重法测定吸水率
- GB/T 14728.2-2024 双臂操作助行器 要求和试验方法 第2部分:轮式助行器
- GB/T 12279.2-2024 心血管植入器械 人工心脏瓣膜 第2部分:外科植入式人工心脏瓣膜
- GB/T 45265-2025 下肢假肢增材制造通用技术要求
- GB/T 39748.7-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分:称重法测定压力作用下的吸液量
- GB/T 39748.8-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分:称重法测定流量
- GB/T 39748.9-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分:称重法测定密度
- GB/T 39868-2021 踝足矫形器
- GB/T 40838-2021 腕矫形器
- GB/T 40889.2-2021 助行器具支脚垫 要求和测试方法 第2部分:拐杖支脚垫耐久性
- GB/T 41170.2-2021 造口辅助器具的皮肤保护用品 试验方法 第2部分:耐湿完整性和黏合强度